Token-Ring Adapter Installation and Support Guide

Relocating a TRSA
Token-Ring Adapter Installation and Support Guide—426955-001
4-28
Add the TRSA Using SCF
a. Log on to the TSM Service Application.
b. From the Display menu, choose Firmware Update.
c. From the Resource type pull-down menu, select resource type.
d. From the Display pull-down menu, select Down-rev only.
A list of resources whose firmware is older than the version of the SYSnn is
displayed in the Available list box. Do the following:
e. Double-click on the resource. The resource is displayed in the Selected list box.
f. Click Perform action to initiate the firmware update.
For information about configuring the conventional TCP/IP, Parallel Library TCP/IP,
IPX/SPX, or Port Access Method (PAM) subsystems to access the TRSA through the
SLSA subsystem, refer to the following manuals:
•
LAN Configuration and Management Manual
•
TCP/IP Configuration and Management Manual
•
TCP/IP (Parallel Library) Configuration and Management Manual
•
PAM Configuration and Management Manual
•
IPX/SPX Configuration and Management Manual.