Token-Ring Adapter Installation and Support Guide

Safety and Compliance

Token-Ring Adapter Installation and Support Guide—426955-001

Statements-4

Consumer Safety Statements

Customer Installation and Servicing of Equipment

The following statements pertain to safety issues regarding customer installation and

servicing of equipment described in this manual.

•

Keep door closed for normal operation.

•

The equipment must be installed near the receptacles for the power cords, and the

receptacles must be easily accessible to the user.

Applicability of Procedures, Instructions, and Examples

WARNING. Do not touch the DC power connector on the S7400/S7x0000 PMF CRU after you

have unplugged the DC power cable from the CRU. It is possible to incur a severe energy

hazard for as long as fifteen (15) seconds after unplugging the cable. You can make sure the

CRU is safe to remove by testing (by using a volt meter) before touching the pins on the DC

power connector.

WARNING. The procedures and instructions and the examples of procedures and instructions

found in this manual apply only to the system enclosures and components found in Himalaya

S-series servers which are described in the Himalaya S-series server documentation. Do not

attempt to use these instructions with any other Compaq NonStop™ system equipment. You

can determine that your system is a Himalaya S-series server by reading the label that

appears inside each system enclosure on the CRU in slot 50 or 55. The label includes the

product number, 195x, 196x, or 197x. Read the label before proceeding with any procedure or

instruction found in this manual.