Token-Ring Adapter Installation and Support Guide

Token-Ring Adapter Installation and Support Guide—426955-001
Index-1
Index
A
Aborting, TRSA adapter 3-12, 4-12
Adapter slot locations 2-5, 3-14, 4-15
Antistatic mat 2-7
Assigning LIFs 2-15, 4-26
C
Cables, customer-supplied 1-2
Checking
firmware version 2-17
, 3-27, 4-27
for damaged pins 2-13, 3-23, 4-22
installation of the TRSA adapter 2-13,
3-23, 4-22
D
Damaged pins 3-1, 4-1
Determining
LIF associated with PIF 3-4
, 4-4
PIF associated with LIF 3-4, 4-4
SNAX/TR lines 3-7, 4-7
TCP/IP processes 3-4, 4-4
E
EMS log 3-30
Error conditions 2-13, 3-23, 4-22
ESD protected environment
antistatic mat 2-8
ESD protection wriststrap 2-8
grounding clip, use of 2-10
illustration of 2-7, 3-15, 4-16
ESD protection kit 2-7
Event Message Service (EMS) log 2-16,
4-27
F
File Transfer Protocol (FTP) 1-7
G
Grounding clip 2-10, 3-17, 4-18
I
Identifying
Communications lines using the TRSA
adapter 3-4
IPXPROTO processes 3-7, 4-7
physical location of adapter 3-12, 4-12
SNAX/TR lines 3-4, 4-4
Installation
assign logical LIFs 2-15
, 4-26
checking for damaged pins 2-13, 3-23,
4-22
Compaq manufacturing 2-1, 3-1, 4-1
overview of 2-8
Token-Ring connectors 4-21
TRSA configuration form
completed form 2-3
, 4-24
unpacking the adapter 2-8
IOMF CRU Replacement
preparing a TRSA B-1
IPXPROTO process names 3-7, 3-8, 4-7,
4-8
IPX/SPX subsystem 1-7
L
Location of adapter 2-3, 4-24
logfilename 3-4, 4-4
M
MAC address 3-4, 4-4
Manufacturing naming conventions 3-12,
4-12
Message system interface 1-6