Token-Ring Adapter Installation and Support Guide
Installing the TRSA
Token-Ring Adapter Installation and Support Guide—426955-001
2-9
Unpack and Install the New TRSA
6. Disconnect the grounding clip of your ESD wriststrap from the TRSA and connect it
to an exposed, unpainted, metal surface on the service side of the system enclosure,
such as the processor multifunction (PMF) adapter or I/O multifunction (IOMF)
adapter ventilation holes.
Figure 2-4. ESD Protected Environment
002CDT .CDD
ESD antistatic table mat.
Mat should be connected to a soft ground
(1 megohm min. to 10 megohm max.)
System Enclosure (Appearance Side)
ESD wriststrap clipped to
door latch stud (or to any
exposed, unpainted, metal
surface on the enclosure
frame.)
ESD wriststrap
with clip
ESD floor mats
Clip 15 inch straight
ground cord to screw
on grounded outlet
cover.