Token-Ring Adapter Installation and Support Guide

Contents
Token-Ring Adapter Installation and Support Guide—426955-001
ii
2. Installing the TRSA (continued)
2. Installing the TRSA (continued)
Install the New TRSA 2-8
Unpack and Install the New TRSA
2-8
Check the Installation of the New TRSA
2-13
Add and Start the TRSA Using SCF
2-15
3. Replacing a TRSA
Prepare to Replace a TRSA 3-2
Gather the Proper Tools
3-2
Print the TRSA Planning Worksheet
3-3
Identify Any Communications Lines Using the TRSA
3-4
Redirect or Stop Any Customer Applications Using the TRSA
3-8
Stop the Communications Lines Using the TRSA
3-9
Determine the Physical Location of the TRSA
3-11
Abort the TRSA
3-12
Label the Communications Cable Connected to the TRSA
3-13
Replace the TRSA
3-15
Review Standard Operating Practices
3-15
Remove the Adapter
3-17
Inspect the New TRSA and Backplane
3-19
Unpack and Install the New TRSA
3-19
Check the Installation of the New TRSA
3-23
Resume Operations
3-25
Start the New TRSA
3-25
Restart the Communications Lines
3-28
Verify That the Communications Lines Are Started
3-29
Troubleshooting: If an Object is Not in the STARTED State
3-30
Resume Customer Applications
3-30
4. Relocating a TRSA
Prepare to Relocate the TRSA 4-2
Gather the Proper Tools
4-2
Print the TRSA Planning Worksheet
4-3
Identify Any Communications Lines Using the TRSA
4-4