Token-Ring Adapter Installation and Support Guide

Installing the TRSA
Token-Ring Adapter Installation and Support Guide—426955-001
2-17
Add and Start the TRSA Using SCF
firmware version is automatically updated by the system, you should verify the
firmware version.)
Use the TSM Service Application to check the firmware version:
a. Log on to the TSM Service Application.
b. From the Display menu, choose Firmware Update.
c. From the Resource type pull-down menu, select resource type.
d. From the Display pull-down menu, select Down-rev only.
A list of resources whose firmware is older than the version of the SYSnn is
displayed in the Available list box. Do the following:
e. Double-click on the resource. The resource is displayed in the Selected list box.
f. Click Perform action to initiate the firmware update.
For information about configuring the conventional TCP/IP, Parallel Library TCP/IP,
IPX/SPX, or Port Access Method (PAM) subsystems to access the TRSA through the
SLSA subsystem, refer to the following manuals:
•
LAN Configuration and Management Manual
•
TCP/IP Configuration and Management Manual
•
TCP/IP (Parallel Library) Configuration and Management Manual
•
PAM Configuration and Management Manual
•
IPX/SPX Configuration and Management Manual