Token-Ring Adapter Installation and Support Guide

Replacing a TRSA
Token-Ring Adapter Installation and Support Guide—426955-001
3-13
Label the Communications Cable Connected to the
TRSA
3. From the Display menu, choose Actions.
4. Select Abort.
5. Click Perform action.
1. Verify that the TRSA ADAPTER object is in the STOPPED state.
Use the SCF STATUS ADAPTER command:
STATUS ADAPTER $ZZLAN.adapter-name
Example 3-15
shows the output of this command. Note that the ADAPTER (EO153)
is in the STOPPED state.
Label the Communications Cable Connected to the TRSA
To label the communication cable for a TRSA:
1. Find group, module, and slot in which the Token-Ring ServerNet adapter (TRSA) is
installed.
Figure 3-2
shows the TRSA slot locations.
Example 3-15. SCF STATUS ADAPTER Command
-->STATUS ADAPTER $ZZLAN.E0153
SLSA Status ADAPTER
Name State
$ZZLAN.E0153 STOPPED