TPDC Manual (G06.24+)

Table Of Contents
Using the SPAM Performance Data Charts and
Reports
Tandem Performance Data Collector (TPDC) Manual526357-001
5-64
EXPAND Network Line Activity (NETREPT)
report contains separate report lines for the path handler and for each line handler. Not
all counter values are reported for each of these entity types.
This report uses the GLOBINFO and EXLINE entities.
Parameters used are:
LID—specifies the Measure Load ID
SECTION—specifies the report section number
The report is sorted by device name.
EXPAND Network Line Activity Report for System \CSO (D20)
-----------------------------------
<--LINE--->
<----PER SECOND----> <--BUSY%-->
$Device Reqsts Reads Writes Read Write (headings continued below)
======== ------ ------ ------ ----- -----
$LHCSQA .02 .27 .13 100.0 .0 (data continued below)
$LHFORG .02 .26 .13 100.0 .0
$LHSUPP .03 .39 .14 100.0 .0
$LHTTC . .40 .20 100.0 .1
<-----BITS PER SECOND-----> <--L2/UD-->
<---Input---> <--Output---> <--MESSAGE BYTE SIZE DISTRIBUTION (PERCENT)---> <--Ratio-->
UData Level2 UData Level2 <64 <128 <256 <512 <1024 <2048 <4096 >4095 Input Outpt
------ ------ ------ ------ ----- ----- ----- ----- ----- ----- ----- ----- ----- -----
. 58 . 47 . . . . . . . .
. 56 . 47 . . . . . . . .
5 162 4 58 98.7 1.3 . . . . . . 34.4 14.20
. 23 . 13 . . . . . . . .