TPDC Manual (G06.24+)

Using the Collected Data
Tandem Performance Data Collector (TPDC) Manual—526357-001
3-9
Creating TPDC Entities for Enform and Other
Programs (TPLD)
Creating TPDC Entities for Enform and Other
Programs (TPLD)
The Tandem Performance Load Data (TPLD) component loads the consolidated data
file and creates component TPDC entity data files, from which you can generate
optional reports using Enform and other programs. Appendix A, Entity and Attribute
Definitions, shows the attributes of each entity.
Running TPLD
When you run TPLD, you specify when the measurement was started on the system
that you are measuring. TPLD checks the default volume for the measurement data.
You can also print the system configuration reports.
NAME processname
defines the process name that TPLD will run under. processname is optional and
is two to five characters in length. The first character must be $, and the second
character must be an alpha. TPLD will not run unless it is started as a named
process.
Figure 3-3. Tandem Performance Load Data (TPLD) Architecture
TPLD / NAME [processname][,OUT outfile ][,NOWAIT]/ yymmdd,
hhmm
[,REPORTS]
Consolidated
Performance
Data
TPDC
Entities
Load Data
(TPLD)
System
Configuration
Reports
VST004.vsd