TPDC Manual (G06.24+)

Using the SPAM Performance Data Charts and
Reports
Tandem Performance Data Collector (TPDC) Manual—526357-001
5-4
System Configuration
System Configuration
The system configuration used to generate most of the reports and charts in this
section was:
•
A D20 system.
•
The Measure load specified a time period of 15:30:16 to 16:30:41 (3625 seconds).
•
This system contains a single CPU type.
•
COLLECT (Spooler Collector Program Name) during TGATHER: CSPOOL
•
ALLOW (Process-to-File Match Tolerance) during TGATHER: 5.00 seconds
•
Percent of CPU process Cpu-Busy-Time matched to PROCESSes: 39.3%
•
Percent of Logical Disk File I/Os matched to PROCESSes: 8.3%
•
Percent of DISCOPEN Driver Calls matched to PROCESSes: 2.2%
TPRODUCE Option Values Used
These TPRODUCE option values were used in the production of the reports and charts
in this section:
•
ALLOW (Process-to-File Match Tolerance): 5.00 seconds (default)
•
AUDIT (TMF Audit Trail Volume Name): $AUDIT (default)
•
BEGIN (Process Timeline Begin Time): 15:30 (default)
•
EXCLUDE (Entity Exclusion Threshold): 0.10 (default)
•
FILE (Specific [partial] File Name) “ ” (default)
•
FLAG (Transient Entity Flag) 90% (default)
•
INTERVAL (Process Timeline Interval): 0 minutes (default)
•
I/OFACTOR (Physical I/O:Cache Hit CPU Cost Ratio): 2.0 (default)
•
MINMSGS (Minimum Messages Received): 10 (default)
•
NEEDLE (SQL Table Selectivity): 1.0000% (default)
•
PROGRAM (Specific [partial] Program Name): “ ” (default)
•
SHOWRCV (Show $RECEIVE in File lists): 0 false (default)