TR3271 Management Programming Manual

TR3271 EVENT MANAGEMENT
160: ZTR3-EVT-CSS-LIU-CONFIG-ERR
ZTR3-TKN-CONFIG-ERR is the type of configuration error that has
occurred. It corresponds to the value config-err in the message
text.
ZTR3-TKN-CLIP-FUNC is the CLIP function and modifier. It
corresponds to the value param1 in the message text.
Volatile Tokens
ZEMS-TKN-CU is a standard EMS token that contains the controller
and unit number. This token is present in the event buffer only
if the controller uses subchannel-type I/O addressing.
Event-Message Text
In the message text, ldev corresponds to the value of ZEMS-
TKN-LDEV, n,n,%nn,%nnn corresponds to the value of ZEMS-MAP-
EXIOADDR, ldevname corresponds to the value ZEMS-TKN-LDEVNAME,
path corresponds to the value ZCOM-TKN-NEW-PATH, config-err
corresponds to the value ZTR3-TKN-CONFIG-ERR, param1 corresponds
to the value ZTR3-TKN-CLIP-FUNC.
Probable Cause
The CLIP of the 6100 CSS received a line configuration different
from that in the I/O process. The line does not come up. If
the value of config-err is 0, a bad configuration was sent to the
CLIP; if the value is 1 there was an unexpected CLIP response.
The value of param1 indicates the CLIP function and modifier, and
the value of param2 is always 0.
Recommended Action
Note the values of config-err , param1 , and param2 in the message
text, and contact your Tandem representative.
7-53