TRANSFER Administration Guide Volume 1 Reference Manual

DEPOT STATISTICS CONFIGURATION Screen
System Control Functions
40591 Tandem Computers Incorporated 10–7
DEPOT STATISTICS
CONFIGURATION
Screen
You get the DEPOT STATISTICS CONFIGURATION screen by pressing SF3 at the
MAIN MENU. This screen is used by the system manager to configure the
TRANSFER depot statistics facility, which measures the amount of disk storage space
each TRANSFER depot is using. All users can view the configuration for depot
storage statistics collection. Changes to these parameters take effect only after
TRANSFER has been stopped and restarted.
Users can display the collected storage statistics. See Section 11, “Displaying Statistics
for Depot Disk Storage.”
ADMIN Depot Statistics Configuration
Current Config Next Config
---------------- ---------------------
Collect Statistics: N Y Y = Yes, N = No
Statistics Ready: N
Count Items When Examined: N Y Y = Yes, N = No
Units used are D = Day, H = Hour, and M = Minute:
Base Time: 00:00 13 : 00
Sample Interval: 0001D 1 M (D/H/M)
Number of Samples (Per Average): 7 7
Number of Averages: 1 1
Standard Item Counting: N Y
--------------------------------------------------------------------------------
F1 - Show config F8 - Update
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
Screen-Specific Fields Input and display-only fields specific to the DEPOT STATISTICS CONFIGURATION
screen are defined in the following paragraphs.
Current Config
This is a display-only column showing the current parameters for collecting depot
storage statistics.
Next Config
This is a column of input fields where system managers can enter values for a new
configuration of collection parameters. TRANSFER must be stopped and restarted for
the new configuration to be in effect.
Collect Statistics
This field shows whether TRANSFER is collecting statistics. Possible values are Y
(yes) and N (no). The default is N, but this field must be set to Y for statistics to be
collected.