TRANSFER Administration Guide Volume 1 Reference Manual

AVERAGE STATISTICS Screen
Displaying Statistics for Depot Disk Storage
40591 Tandem Computers Incorporated 11–9
AVERAGE
STATISTICS Screen
You get the AVERAGE STATISTICS screen by pressing F2 at the DEPOT STATISTICS
screen. This screen displays averages of a number of statistical samples taken during
the current configuration period. The number of samples used to arrive at each
average and the number of averages available for display are specified in the DEPOT
STATISTICS CONFIGURATION screen described in Section 10, “System Control
Functions.”
ADMIN Average Statistics
Correspondent/Group: xxxxx-xxxx @xxxxx
Request Date: yyyy - mm - dd hh : mm
Sample Taken: yyyy-mm-dd hh:mm:ss
Sample Interval: nnn1M
Start Date: yyyy-mm-dd
TOTAL Number of Folders nn
TOTAL Number of Items nn
TOTAL Number of Distribution List Members nn
TOTAL Storage (bytes) nn
Distribution Lists nn
Folders nn
External Objects nn
Item Data nn
--------------------------------------------------------------------------------
F1 - Show stats F4 - Show prev average
F2 - Show folder stats F5 - Show next average
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
Screen-Specific Fields Input and display fields for the AVERAGE STATISTICS screen are defined in the
following paragraphs.
Correspondent/Group
This field specifies the name of the correspondent or group for whom statistics will be
displayed. When the AVERAGE STATISTICS screen first appears, this field contains
the correspondent or group name shown in the same field on the DEPOT STATISTICS
screen.
If you clear the Correspondent/Group field, statistics will be displayed for the depot
belonging to the correspondent running this TRANSFER ADMIN session.
Request Date
This is an input field for the date and time for which statistics are desired. When the
screen is first displayed, this field contains the date and time when the most recent
average was computed from collected samples. The format for the requested date is
yyyy-mm-dd. The time format is hh:mm.
When you specify a date and time, the averaged values closest to the specified date
and time will be displayed. The date and time you specify must fall between the start