TRANSFER Administration Guide Volume 1 Reference Manual

OLD STATISTICS Screen
Displaying Statistics for Depot Disk Storage
11–12 40591 Tandem Computers Incorporated
OLD STATISTICS
Screen
You get the OLD STATISTICS screen by pressing F3 at the DEPOT STATISTICS
screen. This screen is similar to the STATISTICS screen except that it displays old, or
historical, values based on the previous configuration period. The Stop Date field
indicates when the previous configuration period ended.
ADMIN Old Statistics
Correspondent/Group: xxxxx-xxxx @xxxxx
Request Date: yyyy - mm - dd hh : mm
Sample Taken: yyyy-mm-dd hh:mm:ss
Sample Interval: nnn1M
Start Date: yyyy-mm-dd
Stop Date: yyyy-mm-dd
TOTAL Number of Folders nn
TOTAL Number of Items nn
TOTAL Number of Distribution List Members nn
TOTAL Storage (bytes) nn
Distribution Lists nn
Folders nn
External Objects nn
Item Data nn
--------------------------------------------------------------------------------
F1 - Show stats F4 - Show prev sample
F2 - Show folder stats F5 - Show next sample
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
Screen-Specific Fields Input and display fields for the OLD STATISTICS screen are defined in the following
paragraphs.
Correspondent/Group
This field specifies the name of the correspondent or group for whom statistics will be
displayed. When the OLD STATISTICS screen first appears, this field contains the
correspondent or group name shown in the same field on the DEPOT STATISTICS
screen.
If you clear the Correspondent/Group field, statistics will be displayed for the depot
belonging to the correspondent running this TRANSFER ADMIN session.
Request Date
This is an input field for the date and time for which statistics are desired. When the
screen is first displayed, this field contains the date and time when the last sample was
taken for the previous configuration period. The format for the requested date is yyyy-
mm-dd. The time format is hh:mm.
When you specify a date and time, the sample taken closest to the specified date and
time will be displayed. The date and time you specify must fall between the start and
stop dates for the previous configuration period (shown on the screen).