TRANSFER Administration Guide Volume 1 Reference Manual

OLD AVERAGE STATISTICS Screen
Displaying Statistics for Depot Disk Storage
40591 Tandem Computers Incorporated 11–15
OLD AVERAGE
STATISTICS Screen
You get the OLD AVERAGE STATISTICS screen by pressing F4 at the DEPOT
STATISTICS screen. This screen is similar to the AVERAGE STATISTICS screen
except that it displays old, or historical, values based on the previous configuration
period. The Stop Date field indicates when the previous configuration period ended.
ADMIN Old Average Statistics
Correspondent/Group: xxxxx-xxxx @xxxxx
Request Date: yyyy - mm - dd hh : mm
Sample Taken: yyyy-mm-dd hh:mm:ss
Sample Interval: nnn1M
Start Date: yyyy-mm-dd
Stop Date: yyyy-mm-dd
TOTAL Number of Folders nn
TOTAL Number of Items nn
TOTAL Number of Distribution List Members nn
TOTAL Storage (bytes) nn
Distribution Lists nn
Folders nn
External Objects nn
Item Data nn
--------------------------------------------------------------------------------
F1 - Show stats F4 - Show prev average
F2 - Show folder stats F5 - Show next average
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
Screen-Specific Fields Input and display fields for the OLD AVERAGE STATISTICS screen are defined in the
following paragraphs.
Correspondent/Group
This field specifies the name of the correspondent or group for whom statistics will be
displayed. When the OLD AVERAGE STATISTICS screen first appears, this field
contains the correspondent or group name shown in the same field on the DEPOT
STATISTICS screen.
If you clear the Correspondent/Group field, statistics will be displayed for the depot
belonging to the correspondent running this TRANSFER ADMIN session.
Request Date
This is an input field for the date and time for which statistics are desired. When the
screen is first displayed, this field contains the date and time when the last average
was computed for the previous configuration period. The format for the requested
date is yyyy-mm-dd. The time format is hh:mm.
When you specify a date and time, the averaged values closest to the specified date
and time will be displayed. The date and time you specify must fall between the start
and stop date for the previous configuration period (shown on the screen).