TRANSFER Administration Guide Volume 1 Reference Manual

CORRESPONDENT TRANSFER PROFILE Screen, Last Page
Managing Correspondent Profiles
4–16 40591 Tandem Computers Incorporated
CORRESPONDENT
TRANSFER PROFILE
Screen, Last Page
You get this screen by pressing NEXT PAGE at page 3 of the CORRESPONDENT
TRANSFER PROFILE screen. This page of the profile has a different purpose than the
other screens. It does not record parameters that define your TRANSFER
environment. Instead, it provides a place where you can store default values for the
names of foreign X400 correspondents whom you are adding to a distribution list. If
their X400 defaults are stored in this screen, you do not have to reenter the information
for each correspondent.
To see where this information will be inserted, refer to Section 7, “Managing
Distribution Lists.”
ADMIN Correspondent TRANSFER Profile Last Page
Correspondent: xxxxx-xxxxxxx @xxxxxx
X400 Name Defaults
Country: Country is X121: N Y = Yes, N = No
ADMD: ADMD is numeric: N Y = Yes, N = No
PRMD: PRMD is numeric: N Y = Yes, N = No
Org. Name:
----------------------------------------------------------- ------------------
F8 - Update
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
Screen-Specific Fields Input and display fields specific to the CORRESPONDENT TRANSFER PROFILE
screen, Last Page, are defined in the following paragraphs.
Page
This display field indicates which page of the screen you are on.
Correspondent
This display field shows the name of the correspondent entered on the
CORRESPONDENT PROFILES menu screen. To view the profile of a different
correspondent, an administrator must return to the CORRESPONDENT PROFILES
screen and enter a different name in the Correspondent field.
X400 Name Defaults
The following fields record the attributes of an X400 name.
Country. This input field specifies the country for the X400 correspondent. It is a
required field. The value entered must be one to three digits long if it is numeric. The