Data Management Library TRANSFER Administration Guide Volume 2 Messages Manual ™ Abstract Part Number This volume of the TRANSFER Administration Guide explains error messages that may be displayed during use of ADMIN, PS MAIL, and other TRANSFER applications.
Document History Note Edition Part Number Product Version Operating System Version Date First Edition 40592 TRANSFER C30 GUARDIAN 90 C20 July 1991 This manual replaces the IMT Contact Guide, Volume 2, Messages Manual (part number 84085), which was released in November 1987. New editions incorporate any updates issued since the previous edition. Copyright All rights reserved.
Contents About This Manual v Notation Conventions vii Section 1 PATHWAY Errors (3000-3999) Section 2 TRANSFER Errors (4000-6999) Section 3 PS MAIL Errors (7000-7900) Tables Table 2-1. Message 4284—Detail Return Codes 2-35 Table 2-2. Message 4317—Queue Type Values 2-39 Table 2-3. Message 4318—Work Field Values 2-40 Table 2-4. Message 4352—Detail Return Codes 2-46 Table 2-5. Message 4353—Detail Return Codes 2-47 Table 2-6. Message 4354—Detail Return Codes 2-48 Table 2-7.
Contents iv Table 2-24. Message 5055—Detail Return Codes 2-109 Table 2-25. Message 5223—Detail Return Codes 2-120 Table 2-26.
About This Manual This guide explains the messages TRANSFER, ADMIN, PS MAIL, and TMANAGER display to describe system or user errors that may occur during the use of ADMIN or PS MAIL. This is the second volume of the TRANSFER Administration Guide—the Messages Manual. It lists messages in numeric order, describes the problem each indicates, and suggests what to do about it. When you receive an error message, use its number to find the appropriate explanation.
About This Manual How This Manual Lists Error Messages How This Manual Lists This manual lists the primary error numbers that can appear as you use ADMIN and Error Messages PS MAIL, describes the situation each indicates, and suggests how to deal with it.
Notation Conventions The following list summarizes the conventions for syntax presentation in this manual. Notation Meaning UPPERCASE LETTERS Uppercase letters represent keywords and reserved words; enter these items exactly as shown. Lowercase italic letters represent variable items that you supply. Brackets enclose optional syntax items. A group of vertically aligned items enclosed in brackets represents a list of selections from which you can choose one or none. Braces enclose required syntax items.
1 PATHWAY Errors (3000-3999) 3016 Insufficient resources to perform requested function. Cause. You have been moving from one screen to another without returning to a previous screen, and PS MAIL has exhausted its resources for keeping track of your progress. Effect. PS MAIL was unable to perform the action you requested. Recovery. Press SF16 to return to the MAIN MENU screen.
PATHWAY Errors (3000-3999) 3027 Transaction restart limit exceeded. Retry in a few minutes. Cause. PS MAIL tried to restart a transaction, but there was a timeout on a message. Effect. The transaction was not performed. Recovery. Wait until the message is available and try again. 3030 TMF is not configured. See your system manager. Cause. TMF is not configured. Effect. TRANSFER cannot run on your system. Recovery. See your system manager. 3031 TMF is not running. See your system manager. Cause.
2 TRANSFER Errors (4000-6999) 4000 TRANSFER Interactive Server Return Base error code. Cause. All TRANSFER Interactive Server numbers are in the 4000 range; this is the base number for these errors. Effect. You should never see this code. Recovery. No recovery is required. 4001 End of file. Cause. This warning reflects a TRANSFER application programming error. It means that all available data has been returned and the unit of work (UOW) need not be called again for more data. Effect.
TRANSFER Errors (4000-6999) 4007 You may not log on using this correspondent ID. Cause. The Logon Allowed flag in your TRANSFER correspondent profile has been set to N (no). Effect. You cannot log on to TRANSFER. Recovery. A system administrator with system administrative write privileges can change this flag so you can log on. 4009 Write not allowed. Cause. A requested update operation is not permitted under the current circumstances. Effect. The operation is not performed. Recovery.
TRANSFER Errors (4000-6999) Recovery. Reenter your password and try to log on again. Remember that uppercase and lowercase letters are not interchangeable. 4017 Restricted operation. Cause. The operation you requested can only be requested by TRANSFER internal programs. Effect. The operation is not performed. Recovery. Try a different operation to accomplish your goal. 4019 INTERNAL ERROR: ALREADY IN SESSION. Report to Tandem Computers, Inc. Cause.
TRANSFER Errors (4000-6999) 4027 Ambiguous name. Cause. You entered an abbreviated name (containing wild-card characters) that could not be expanded into a unique name. Effect. TRANSFER could not identify the name you want. Recovery. Make the name unique by entering more of the name’s actual characters before or after the wild-card character. 4028 Bad suffix; cannot fully resolve name as given. Cause. This is an internal error code. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) 4036 The item is too complicated. Cause. The item has more levels of nesting than TRANSFER can handle. Effect. Your request is not processed. Recovery. Delete some attachments and try again to add the attachment or send the message. 4037 Parent not found. Cause. In trying to attach one item as a component of another, TRANSFER found no record for the parent item in the database. Effect. The item is not attached. Recovery.
TRANSFER Errors (4000-6999) Recovery. Ask the system manager to run the TCHECK file utility to correct inconsistencies in the TRANSFER database. 4041 Item cannot be altered; it has already been submitted for delivery. Cause. You have tried to alter an item that has already been submitted. Effect. You are not permitted to perform the function. Recovery. Items cannot be altered if they belong to a message that has been submitted for delivery.
TRANSFER Errors (4000-6999) Effect. TISERV might not be able to schedule the current job. If the error number displayed is negative, it is a warning and your job has been scheduled. You can proceed. If the error number is positive, functions requiring asynchronous services, such as sending and cancelling, cannot be performed. Recovery. In either case, inform your system manager that TSCHED is unavailable. 4046 Invalid record type. Cause. The specified record type is reserved for use by TRANSFER. Effect.
TRANSFER Errors (4000-6999) 4049 Record already exists. Cause. You tried to add records that have already been added to the TRANSFER database. Effect. The redundant records are not added. Recovery. Add records not already stored. 4050 Update mismatch. Cause. The record update control does not match. Either the programmer has returned the wrong key, or someone has updated the record between the read request and the update request. Effect. Your update is not performed. Recovery.
TRANSFER Errors (4000-6999) 4054 Invalid Agent Select field. Cause. An invalid value has been entered in the Agent Select field on the ADMIN AGENT CONFIGURATION screen. Effect. The requested function is not performed. Recovery. Agent Select field values must be in the range of 0 to 9999, and the From field value must not be greater than the Through field value. Correct the invalid Agent Select field on the ADMIN AGENT CONFIGURATION screen and request the function again.
TRANSFER Errors (4000-6999) 4061 Item not in folder. Cause. The specified message is not filed in the specified folder. Effect. The requested item is not retrieved. Recovery. Make sure you’re using the right item name, or look for it in a different folder. 4063 Item not returned. Cause. This message is generated on of two ways: 1. An item handle in a UOW attempted to refer back to an item ID in a previous UOW that was not returned. 2.
TRANSFER Errors (4000-6999) 4067 Remote name accepted without validation. Cause. You entered a correspondent name or a distribution list name that is defined at another node. The name has been accepted, but the validity of the name has not been verified because the Defer Remote Name Resolution flag in your TRANSFER correspondent profile is set to Y (yes). The name is not verified as an existing name until TRANSFER attempts to deliver mail using the name you entered. Effect.
TRANSFER Errors (4000-6999) 4074 Invalid relative time quantity. Cause. You entered an invalid relative time quantity for the indicated delivery parameter or item retention time. (A relative value is one like "in 30 days," as opposed to an absolute value like "April 23.") Effect. The requested function is not performed. Recovery. Check the correct format and correct your entry. 4075 Time specified was less than the system minimum and was extended. Cause.
TRANSFER Errors (4000-6999) 4079 Priority was too high; reduced to depot limit. Cause. You specified a priority that was higher than the maximum priority configured for your depot on the TRANSFER CORRESPONDENT PROFILE screen, page 2; TRANSFER reduced it to the depot limit. Effect. The value you specified will not be used. Recovery. Check the maximum priority configured for your depot in your TRANSFER CORRESPONDENT PROFILE and specify values within the maximum. 4080 The package was not received. Cause.
TRANSFER Errors (4000-6999) Recovery. Attempt to cancel only mail that you have created and sent. 4084 This mail has never been submitted for delivery. Cause. You attempted to cancel delivery of a piece of mail that you filed in a folder but never sent. Effect. The message is not cancelled. Recovery. Attempt to cancel only mail that you have created and sent. 4085 Data too long; item records are limited to 2000 bytes. Cause. A TRANSFER application tried to add an item data record that was too long.
TRANSFER Errors (4000-6999) Effect. The message you receive will have truncated lines. Recovery. If you get this message in PS MAIL, ask the sender to resend the message with abbreviated lines of text so you will receive all the data. For other applications, the programmer should modify the application to accommodate longer record lines. 4090 One or more characters truncated from name during decollation. Cause.
TRANSFER Errors (4000-6999) 4094 The package has been cancelled. Cause. The cancellation of a message delivery that you requested was successful. Effect. This is a notification only. Recovery. Information only. No recovery is required. 4095 The package has expired. Cause. A TRANSFER application acknowledged receipt of a package that had already expired. Effect. Your recipient did not look at the package. Recovery. Information only. 4096 Problem with item descriptor file. See your system manager.
TRANSFER Errors (4000-6999) 4102 An invalid length for an ordering key was specified. Cause. Your process specified an ordering key length either less than 0 or greater than 200. The SCAN-FOLDER-BY-KEY UOW also returns this error if GENERIC-KEY-LEN is greater than STARTING-KEY-LEN. (This error occurs only in customer applications that define their own folder-ordering criteria.) Effect. The ordering function will not perform properly. Recovery. Specify an ordering key length between 0 and 200.
TRANSFER Errors (4000-6999) 4106 Folder has a faulty ordering criteria. Cause. The ordering criteria for the folder is invalid. Effect. Although the folder is usable and most UOWs that access folders can still be issued for it, no additional messages can be stored in the folder. Recovery. Report this error to the system manager. 4115 WPLINK is unavailable on your system. Cause. You have tried to perform a WPLINK task on a node where WPLINK is not installed.
TRANSFER Errors (4000-6999) 4150 That name has already been assigned to another item in this folder. Cause. You have tried to give an item a name that already exists in this folder. Effect. The item is not named. Recovery. Each item filed in a folder must have a unique name. Choose another name and refile. 4151 The item name you supplied contains illegal characters. Cause. You didn’t follow the rules for naming items. Effect. The item is not named. Recovery.
TRANSFER Errors (4000-6999) 4161 Merge to a new list, then add X400 name. Cause. The specified X400 name cannot be added as a distribution list member or recipient. You specified an X400 name as a new distribution list member for a distribution list created prior to the C30 release of TRANSFER, or you attempted to ad an X400 name as a recipient of a package created prior to the C30 TRANSFER release. Effect. The name is not accepted. Recovery.
TRANSFER Errors (4000-6999) Recovery. Report this problem to the system manager. The appropriate UOW must be used to execute this request. 4167 There is no X400 creator name available for the message. Cause. The specified item is not a mail package. Effect. The function is not executed. Recovery. Report this problem to the system manager. The appropriate UOW must be used to execute this request. 4168 A distribution list may have no more than 9999 X400 members. Cause.
TRANSFER Errors (4000-6999) Effect. The system will not accept the retention time value. Recovery. Use a retention time of at least 14 days for folders in the X400 depot. The X400 depot folders are X400-EXPORT, X400-EXPORT-PROBLEM, X400-IMPORT, and X400-IMPORT-PROBLEM. 4201 Context error. Cause. A GUARDIAN 90 error occurred while TRANSFER was processing this request. Effect. The request is not performed. Recovery. Report the GUARDIAN 90 error number to the system manager.
TRANSFER Errors (4000-6999) 4206 The default model group does not exist. Cause. The model group name given is known to the Naming system; however, no depot or profile record exists. Effect. You can’t use the model group. Recovery. The default model group depot has been deleted, and must be recreated. 4207 The model group specified must be a group, and not a correspondent. Cause. You supplied a correspondent name, rather than a group name, for the model group in a create group operation. Effect.
TRANSFER Errors (4000-6999) 4214 Invalid agent name. Cause. You typed an agent name to be added to your agent selection list that is not valid. Effect. The agent is not added. Recovery. Check to see that the name is left-justified in the New Agent Name field and does not contain embedded blanks or illegal characters. 4216 Invalid record number. Cause. This is an internal Tandem coding error. Effect. Operation not performed. Recovery. Report the error to the Tandem Online Support Center.
TRANSFER Errors (4000-6999) 4227 One or more errors on members. Cause. You specified a member for an interest group, but the member does not exist. Effect. The function is not executed. Recovery. Ensure that all interest group member names are correct and try the operation again. If the error persists, see your system manager. 4229 Flag must be E or A. Cause. The flag is set to a value other than E or A. This is an internal Tandem coding error. Effect. The function you requested is not performed.
TRANSFER Errors (4000-6999) Effect. The agent is not configured. Recovery. Set this flag to Y if the agent is a SCREEN COBOL agent or to N if the agent is a PATHWAY server class. Type either an uppercase or a lowercase Y or N and request the function again. 4233 The type is incorrect. Cause. The type of the name is not correct for the request. Effect. The request is not performed. Recovery. Enter a different name and try again. 4237 The GUARDIAN 90 name is not a valid file name. Cause.
TRANSFER Errors (4000-6999) 4241 Program error (TRANSFER system record absent). Cause. No TRANSFER system control record can be found. Effect. The function you requested is not performed. Recovery. Ask the system manager to run the TCHECK file utility to correct inconsistencies in the TRANSFER database and report the error to the Tandem Online Support Center. 4242 Program error (TRANSFER/MAIL system record absent). Cause. No mail system control record can be found. Effect.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. Add the next name you want. 4249 Invalid options specified. Cause. You were attempting to retrieve the member names of an interest group, and one or more options specified for retrieval are invalid. This problem reflects a TRANSFER application coding error. Effect. The function you requested is not performed. Recovery. Report the problem to your system manager.
TRANSFER Errors (4000-6999) 4255 Group members still exist. Cause. You tried to delete a group, but group members still exist. Effect. The operation is not performed. Recovery. Delete the members, if appropriate, and then the group. 4256 An unexpected problem occurred while adding a group. Cause. An unexpected error occurred while adding a group. the INTGROUP file while reading an existing record. A file error occurred on Effect. The group is not added. Recovery. Try the operation again.
TRANSFER Errors (4000-6999) Recovery. Group members must be local to the instance of the group. Enter only local names as members of the group. 4260 The group member name specified is not a direct group member. Cause. You requested an operation that can only be performed on a direct group member (and not a member of a nested group). Effect. The function you requested is not performed. Recovery. Choose a direct group member on which to operate, and try the function again.
TRANSFER Errors (4000-6999) 4266 Invalid application-defined ordering type. Cause. You entered a value outside the range of 0 to 9999. This error reflects an error in a customer-written TRANSFER application with regard to the criteria for ordering folders. Effect. The function you requested is not performed. Recovery. Use a value in the range of 0 to 9999 in your criteria for ordering folders. 4267 Folder must be empty before attempting to alter folder order. Cause.
TRANSFER Errors (4000-6999) Recovery. TRANSFER sets the WASTEBASKET's default item retention time to infinity so that messages are never automatically discarded; you cannot change this setting. 4271 Folder added. Item retention time reduced. Cause. You entered a folder item retention time that was larger than the depot maximum item retention time specified in your TRANSFER correspondent profile. Effect. TRANSFER reduces the time to the maximum value set for the depot. Recovery.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. Ask your system manager to report the problem to the Tandem Online Support Center. 4278 A required parameter is missing. Cause. A required parameter was not supplied to an internal procedure. This is a Tandem internal error. Effect. The function you requested is not performed. Recovery. Ask your system manager to report the problem to the Tandem Online Support Center. 4279 The sharing discipline is invalid.
TRANSFER Errors (4000-6999) 4284 INTERNAL ERROR: GFSERV Server request error. Cause. Multiple possible causes, depending on the code displayed at the right end of the advice line. Effect. The function you requested is not performed. Recovery. Note the code displayed at the right end of the advice line. If the number displayed here is 4990, request the function again (a timeout occurred).
TRANSFER Errors (4000-6999) Table 2-1. Message 4284—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 4300 Old password is not correct. Cause. You tried to change your TRANSFER password, but the password you entered in the Change Password From field does not match the current password in your TRANSFER correspondent profile. Effect. Your password does not change. Recovery. Type your existing password in the Change Password From field exactly as you originally typed it; uppercase and lowercase letters are not interchangeable.
TRANSFER Errors (4000-6999) 4304 Type correct GUARDIAN 90 ID and password. Cause. You have made one of two errors: 1. You tried to perform an operation—such as editing, printing, or adding GUARDIAN 90 files as attachments—that requires a valid GUARDIAN 90 user ID in your TRANSFER correspondent profile. 2. In attempting to update your TRANSFER correspondent profile, you typed an incorrect GUARDIAN 90 ID, left the GUARDIAN 90 User ID field blank, or typed an incorrect GUARDIAN 90 password. Effect.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. Enter an acceptable GUARDIAN 90 system name before trying to update your profile. 4309 Language cannot be altered while a session is active for the depot. Cause. You tried to change the language identifier while the depot was in session. Effect. The change you requested is not implemented. Recovery.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. This is a TMANAGER message intended for the system manager. The value supplied for DataBase File threshold is interpreted as a percentage of file capacity, where 100 is 100 percent. A value of 0 is interpreted as “no capacity threshold.” Enter a value within the range 0 to 100. 4317 A value other than 0 through 4 has been supplied for Queue Type. Cause.
TRANSFER Errors (4000-6999) Table 2-3. Message 4318—Work Field Values 4319 Value Meaning 0 1 2 3 4 5 6 7 8 9 10 11 12 1001 9999 Control record present Submit Package Cancel Package Local Delivery Local Package Expiration Remote Shipment Remote Cancel Certify Package Delete Item Delivery Ends Unsave Item Delete External Object Translation Requested End Session Invalid function code Max Value must be in the range 0 to 9,999,999,999. Cause. An incorrect value was specified for the Max value.
TRANSFER Errors (4000-6999) 4321 The value supplied for Server Type is invalid. Cause. An incorrect value was supplied for the Server type. It reflects a Tandem application coding error. Effect. The function you requested is not performed. Recovery. Notify the Tandem Online Support Center. 4322 The value supplied for Log Records per open is invalid. Cause. An incorrect value was supplied for the Log Record Per Open field. Effect. The function you requested is not performed. Recovery.
TRANSFER Errors (4000-6999) Recovery. Information only. No recovery is required. 4326 Request cancelled. Cause. After first requesting a deletion, you subsequently cancelled the request on the verification screen. Effect. The deletion you originally requested is cancelled. Recovery. Information only. No recovery is required. 4327 Agent added. Cause. The agent name you typed in the Add Agent field has been added to the agent selection list. Effect.
TRANSFER Errors (4000-6999) Recovery. Information only. No recovery is required. 4331 Deleted: Cause. You deleted a folder. Effect. The folder name displayed in the message has been deleted from your depot. Recovery. Information only. No recovery is required. 4334 Distribution list added. Cause. You entered a distribution list name. Effect. The name has been added to your depot. Recovery. Information only. No recovery is required. 4335 Deleted: Cause.
TRANSFER Errors (4000-6999) 4338 Cursor must be on a folder name. Cause. You tried to delete a folder, but your cursor was not at a folder name. Effect. The folder is not deleted. Recovery. Retry the operation. 4339 Cursor must be on a distribution list name. Cause. You tried to delete a distribution list, but your cursor was not at a distribution list name. Effect. The distribution list is not deleted. Recovery. Retry the operation. 4340 Cursor must be on a correspondent name. Cause.
TRANSFER Errors (4000-6999) Recovery. No recovery required. 4348 Correspondent added. Cause. You successfully added a correspondent. Effect. The correspondent name you typed has been added to the TRANSFER database. Recovery. Information only. No recovery is required. 4349 Deleted: Cause. You successfully deleted a correspondent. Effect. The correspondent name displayed in the message has been deleted from the TRANSFER database. Recovery. Information only. No recovery is required.
TRANSFER Errors (4000-6999) Table 2-4.
TRANSFER Errors (4000-6999) Table 2-5.
TRANSFER Errors (4000-6999) Table 2-6.
TRANSFER Errors (4000-6999) 4356 INTERNAL ERROR: TISERV Server request error. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Report the error and the return code number to the system manager or the Tandem Online Support Center. Table 2-7 shows possible return codes.
TRANSFER Errors (4000-6999) Table 2-7. Message 4356—Detail Return Codes 2–50 Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 4357 SEND failure to TISERV server. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes include the following.
TRANSFER Errors (4000-6999) Table 2-8. Message 4357—Status Codes Value Meaning 1 2,3 4 5 6 7,8 10 11 12 13 Server class frozen. The system manager has blocked use of the server. Resource unavailable. The PATHWAY configuration is insufficient. Link denied for indeterminate reasons. Server class undefined. A PATHWAY or TRANSFER configuration problem. Illegal server class name. Might be a TRANSFER configuration problem. Message or reply too large. Might be an internal error in TRANSFER. Undefined reply.
TRANSFER Errors (4000-6999) Recovery. Report the error, the displayed code and subcode, and the error number at the right end of the advice line to the system manager or the Tandem Online Support Center. 4361 SEND failure to HELP server. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again.
TRANSFER Errors (4000-6999) Table 2-9. Message 4361—Status Codes 4362 Value Meaning 1 2,3 4 5 6 7,8 10 11 12 13 Server class frozen. The system manager has blocked use of the server. Resource unavailable. The PATHWAY configuration is insufficient. Link denied for indeterminate reasons. Server class undefined. A PATHWAY or TRANSFER configuration problem. Illegal server class name. Might be a TRANSFER configuration problem. Message or reply too large. Might be an internal error in TRANSFER.
TRANSFER Errors (4000-6999) 4367 No names found. Cause. You entered a pattern for a list of names, but no names that match the pattern were found. Effect. The list you requested is not displayed. Recovery. Retry the operation with a different pattern. 4368 No next page. Cause. You pressed the NEXT PAGE key, but there is no next page to display. Effect. The screen is unchanged. Recovery. You are at the end of the file. Press PREVIOUS PAGE to go back towards the beginning of the file, or exit.
TRANSFER Errors (4000-6999) 4371 Function key has no meaning on this screen. Cause. You pressed a function key that is not valid on the current screen. Effect. The screen is unchanged. Recovery. All valid function keys are listed on each PS MAIL or ADMIN screen. Choose a valid function and retry the operation. 4372 First page. Cause. You are currently on the first page. Effect. Information only. Recovery. No recovery required. 4373 Already on first page. Cause.
TRANSFER Errors (4000-6999) 4376 Control record updated. Cause. The TRANSFER system control or PS MAIL system control parameters have been updated with changes you typed on the screen. Effect. Your update was successful. Recovery. No recovery required. 4378 Text Server request error. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery.
TRANSFER Errors (4000-6999) Table 2-10. Message 4378—Detail Return Codes 2–58 Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 4379 SEND failure to Text Server. Cause. The status code displayed at the right end of the advice line is the TERMINATION-STATUS register setting after a SEND error has occurred. Effect. The requested function is not performed. Recovery. If the status code is 4 or 12, request the function again. If the error persists, report the error and the status code number to the system manager. The following are status codes: Table 2-11.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. You must name an existing disk volume. 4382 Value must be T, S, L, or F. Cause. You typed an invalid specification for the order in which messages are retrieved from your folders. Effect. The function you requested is not performed. Recovery. Type one of the following uppercase or lowercase letters: T Ordered in chronological sequence; earliest sent is first retrieved.
TRANSFER Errors (4000-6999) M Month first (for example, 12/31/87). D 4386 Day first (for example, 31/12/87). Cursor must be on a name. Cause. You requested a function without placing the cursor at the name on which you wanted to operate. Effect. The function you requested is not performed. Recovery. Place the cursor at a name in the list displayed and retry. 4388 Value must be R, W, or N. Cause. You typed an invalid specification for the Privilege flag on the TRANSFER CORRESPONDENT PROFILE screen.
TRANSFER Errors (4000-6999) 4391 Only the values of I and S are allowed for this flag. Cause. A TRANSFER application specified a value other than I or S in a UOW expecting those values. Effect. The function you requested is not performed. Recovery. This is an application coding error, which a user should not see. Report the error to the system manager. 4392 File name must be a disk file. Cause. You used a process or device name for a disk file name. Effect. The function you requested is not performed.
TRANSFER Errors (4000-6999) Recovery. Check to see if your text is still displayed or if the output file location you supplied is spelled correctly and is valid. If the program was either the host-resident or the workstation-resident IXF software, see the 654X Information Xchange Facility User's Guide. If the problem persists, ask the system manager to check that the formatter and editor program file names are specified correctly in your mail profile. 4401 CPU failure stopped process. Cause.
TRANSFER Errors (4000-6999) 4405 The file already exists. Cause. You tried to create a file that already exists. Effect. No new file is created. Recovery. You can either rename the old file or purge it if you want to reuse the file name. 4410 The workstation or PC-resident IXF software could not be invoked. Cause. You requested a file transfer to or from a workstation, but the PC-resident IXF program could not be invoked. Effect. The file transfer is not executed. Recovery.
TRANSFER Errors (4000-6999) 4416 Print location is invalid. Cause. You tried to print or format a message using the default printer, but the print location in the depot profile is invalid. Effect. Your print or format request is not executed. Recovery. Correct the default print location in the user profile. 4418 Type a file name on the options line. Cause. You tried to add an attachment or copy a message without typing a file name on the options line. Effect. No attachment is added. Recovery.
TRANSFER Errors (4000-6999) 4422 Messages may only be copied to a file. Cause. You tried to copy a message to a destination that was not a GUARDIAN 90 file or a PC file. Effect. The message is not copied. Recovery. Correct the destination file name and retry. 4423 Type correct file to add. Then press F7. Cause. You tried to add a file that is not valid as an attachment. Effect. The attachment is not added. Recovery. Type a valid file name.
TRANSFER Errors (4000-6999) 4428 Invalid use of keyword: Cause. The user was trying to add a GUARDIAN 90 file as an attachment to the workspace and one of the keywords typed on the options line was not used properly. Effect. The file is not added. Recovery. Check the error message for the invalid keyword you must correct. 4430 The message cannot be output on a printer. Cause. You tried to print an attachment of a type, like DATA or PCDATA, that cannot be printed. Effect.
TRANSFER Errors (4000-6999) Recovery. Make sure that you spelled the printer or file name correctly. If any other error number is displayed, report the error and the error number to the system manager. 4451 Unable to write to specified file. See your system manager. Cause. You attempted to print mail, and the indicated error occurred. If error number 14 is displayed, the device is not available. If error number 48 is displayed, you are not allowed to write in this file. Effect. The mail is not printed.
TRANSFER Errors (4000-6999) 4471 Unable to log on to GUARDIAN 90. See your system manager. Cause. You entered your correspondent name and password on the LOGON screen, but a session cannot be started for you. Effect. Your logon fails. Recovery. Check your correspondent name for correct spelling; if you entered an abbreviation for your name, make sure the abbreviation is unique. You might not have entered your correct password; reenter your password and try to log on again.
TRANSFER Errors (4000-6999) Recovery. The IXF software is used to exchange data between files on a workstation and files and devices on the Tandem host network. The IXF software consists of two separate programs: IXF.EXE on the workstation, and the IXF program on the host. See the 654X Information Xchange Facility User's Guide for further details. Try the operation once again; if the error persists, report the error to your system manager.
TRANSFER Errors (4000-6999) 4481 Attempt to purge non-disc file. Cause. An internal coding error has been encountered. Effect. There is no effect on your system usage. Recovery. Report this error to your system manager or the Tandem Online Support Center. 4482 The input file must be an unstructured disc file. Cause. The disk file being added as an enclosure does not have the proper file code. Effect. The file is not added. Recovery.
TRANSFER Errors (4000-6999) Recovery. To put data out to, or get data from, a PC disk file within PS MAIL, you must be using an acceptable workstation. 4486 Expected text file name is missing. Cause. This is an internal error that occurred while invoking the text editor named in your correspondent profile. Effect. The function you requested is not performed. Recovery. Notify the system manager. 4488 Your text editor must be either EDIT, T-TEXT, or TEDIT. Cause.
TRANSFER Errors (4000-6999) 4492 Formatted output has been requested. Cause. Either your mail correspondent profile indicates that formatting should be done automatically when the print function is requested, or you supplied the keyword FORMAT with your print request. Effect. No ill effect. Recovery. The formatter named in your mail correspondent profile should be automatically invoked to provide formatted output. As a PS MAIL user, you should not see this internal warning.
TRANSFER Errors (4000-6999) 4496 An enclosure of the type specified could not be found. Cause. You used the TYPE - keyword combination on the options line with the print function. Thus, you requested that the first-level enclosures of item type
- be printed. No enclosures of the item type you specified could be found. Effect. You print request was not executed. Recovery. Double-check the item type and retry the operation. 4497 The parameter line contains unrecognized options.
TRANSFER Errors (4000-6999) Recovery. Check the names to be sure that commas separate the names, that the names are spelled correctly, and that the list does not contain more than ten names. 4504 Too many items were selected. Cause. The number of items you requested to scan, read, or print exceeds 100; PS MAIL 6530 cannot sort more than 100 items from all the selected folders. Effect. The extra items were ignored. Recovery.
TRANSFER Errors (4000-6999) Recovery. A month value must be between 1 and 12. Check your mail profile for the expected format (month first or day first). 4528 Specified hour is out of range. Cause. You typed an invalid hour value in a time format. Effect. The function you requested is not performed. Recovery. Use a valid hour value: an hour value must be between 0 and 24. An hour value of 0 refers to the hour preceding 1:00 a.m.
TRANSFER Errors (4000-6999) 4533 A date and time in the past cannot be used. Cause. You typed a date that occurs in the past for the Delivery May Begin, Delivery Must Stop, or Expires field. Effect. The function you requested is not performed. Recovery. These fields can indicate only dates in the future. Specify a date in the future. 4534 A date and time in the future cannot be used. Cause. You typed a date that occurs in the future in the Mailed Since, Mailed Before, or Mailed On field. Effect.
TRANSFER Errors (4000-6999) Recovery. Create a distribution list that includes all the recipients. 4560 One or more lines contain non-displayable information. Cause. One or more lines are not displayable. Effect. A blank line has been substituted in its place for display. Recovery. No recovery. 4600 Delivery processing for this recipient is not performed at this node. Cause. This is a delivery status code, usually displayed in TMANAGER. Effect. Information only. Recovery. No recovery required.
TRANSFER Errors (4000-6999) Effect. Information only. Recovery. No recovery required. 4605 Package was cancelled by sender before recipient acknowledged receipt. Cause. Your cancellation request was processed before the recipient acknowledged the message. Effect. Information only. Recovery. This is a delivery status code, usually displayed in TMANAGER. 4606 Package was cancelled by sender after recipient acknowledged receipt. Cause.
TRANSFER Errors (4000-6999) Effect. This is a delivery status code only, usually displayed in TMANAGER. The function you requested was not performed. Recovery. Information only. 4624 External objects disabled. Cause. You tried to send a package with an external object attached to a recipient on a remote node, but the remote node TRANSFER configuration has not enabled external objects. Effect. Your package is not delivered. Recovery.
TRANSFER Errors (4000-6999) 4628 Character set problem. Cause. You tried to send a package to a recipient on a remote node, but the remote node TRANSFER configuration does not support the character set used in your package. Effect. Your package is not delivered. Recovery. Send a package that uses the character set supported on the remote node. 4629 GMT incorrect. Cause.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center. 4902 System profile file error. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message.
TRANSFER Errors (4000-6999) 4910 System RECIP file error. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center. 4912 System folder file error. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect.
TRANSFER Errors (4000-6999) 4918 System TIME file error. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center. 4920 System NET file error. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect.
TRANSFER Errors (4000-6999) Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center. 4931 Format Name file error. Cause. A GUARDIAN 90 file error has occurred on the file. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center.
TRANSFER Errors (4000-6999) 4938 There is a problem with the X400EXTID file. See your system manager. Cause. A GUARDIAN 90 file error has occurred on the file. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number appears at the right end of the error message. Report this error to the system manager or to the Tandem Online Support Center. 4943 INTGROUP file error. Cause. An internal error has occurred. Effect. The function you requested is not performed.
TRANSFER Errors (4000-6999) Recovery. Retry the operation. The GUARDIAN 90 file code of the inaccessible file is at the right end of the error message. If this error occurs frequently, report this error to the system manager or to the Tandem Online Support Center. 5001 Invalid To recipients (not found, ambiguous, or incorrect form). Cause. You entered one or more primary recipient names that are not correct. Effect. The function you requested is not performed. Recovery.
TRANSFER Errors (4000-6999) Table 2-13. Message 5003—Status Codes Value Meaning 1 2,3 4 5 6 7,8 10 11 12 13 Server class frozen. The system manager has blocked use of the server. Resource unavailable. The PATHWAY configuration is insufficient. Link denied for indeterminate reasons. Server class undefined. A PATHWAY or TRANSFER configuration problem. Illegal server class name. Might be a TRANSFER configuration problem. Message or reply too large. Might be an internal error in TRANSFER. Undefined reply.
TRANSFER Errors (4000-6999) Table 2-14. Message 5004—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5006 FORMAT SEND failure. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes are shown in Table 2-15. Table 2-15.
TRANSFER Errors (4000-6999) Table 2-16. Message 5007—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5009 SELECT Server SEND failure. See your system manager. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes are shown in Table 2-17. Table 2-17.
TRANSFER Errors (4000-6999) Table 2-18. Message 5010—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5012 TISERV SEND failure. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes are shown in Table 2-19. Table 2-19.
TRANSFER Errors (4000-6999) Table 2-20. Message 5013—Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5015 GUARDIAN 90 File Server SEND failure. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes are shown in Table 2-21. Table 2-21.
TRANSFER Errors (4000-6999) Table 2-22. Message 5016—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5018 There is no mail to display in the folders you selected. Cause. You requested the SCAN or READ functions, but the folders you selected to scan or read are empty. (If you did not type any folder names, it means your INBOX is empty.) Effect. No mail is retrieved. Recovery. Try another folder. 5019 INTERNAL ERROR: SELECT. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery.
TRANSFER Errors (4000-6999) The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5022 INTERNAL ERROR: CREATE MAIL (CREATE function). Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message.
TRANSFER Errors (4000-6999) 5025 INTERNAL ERROR: CREATE MAIL (COPY MAIL function). Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis.
TRANSFER Errors (4000-6999) Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5029 Error with the MAIL-EXTENSION (possibly none defined). Cause. An internal error has occurred. Effect.
TRANSFER Errors (4000-6999) The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5032 INTERNAL ERROR: DISCARD-ITEM. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message.
TRANSFER Errors (4000-6999) 5035 INTERNAL ERROR: READ-EXPAND. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis.
TRANSFER Errors (4000-6999) Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5039 INTERNAL ERROR: READ-ASSIST. Cause.
TRANSFER Errors (4000-6999) The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5043 INTERNAL ERROR: ENTER-TEXT-13. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message.
TRANSFER Errors (4000-6999) 5046 INTERNAL ERROR: SEND-EXPAND. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis.
TRANSFER Errors (4000-6999) Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis. If this second error number is in the 3000 range, see the error message definitions in the PATHWAY PATHCOM Reference Manual. 5050 INTERNAL ERROR: PRINT-ITEM-LIST. Cause. An internal error has occurred. Effect.
TRANSFER Errors (4000-6999) 5053 INTERNAL ERROR: HELP-SCREEN. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis.
TRANSFER Errors (4000-6999) 5055 PROCESS-SERVER request error. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Report the error and the error code number displayed at the right end of the advice line to the Tandem Online Support Center. Table 2-24 shows return codes. Table 2-24. Message 5055—Detail Return Codes Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session.
TRANSFER Errors (4000-6999) 5056 INTERNAL ERROR: EDIT-ITEM. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Retry the function that produced the error message. If the error message appears again, report the error and error code displayed on the advice line to the system manager. The second number in the error message helps in problem analysis.
TRANSFER Errors (4000-6999) 5072 No next page. Cause. You pressed the NEXT PAGE key, but there is no next page to display. Effect. The screen is unchanged. Recovery. You are at the end of the file. Press PREVIOUS PAGE to go back towards the beginning, or exit. 5073 No previous page. Cause. You pressed the PREVIOUS PAGE key, but there is no previous page to display. Effect. The screen is unchanged. Recovery. You are at the beginning of the file. Press NEXT PAGE to go through the file, or exit.
TRANSFER Errors (4000-6999) If the previous screen was the LOGON or MAIN MENU screen, you cannot file mail from the SHOW FOLDERS screen. If you want to file a message you are creating, type the folder name in the File In field on the CREATE MAIL or CREATE MAIL ENVELOPE screen and press F7. 5077 Cursor must mark an entry in the list. Cause. You did not put your cursor at the message you want to read, scan, delete, cancel, file, add as an enclosure, reply to, or forward. Effect.
TRANSFER Errors (4000-6999) 5082 Parameter field must be empty. Cause. You pressed a function key that requires the parameter line on your screen to be blank. Effect. The function you wanted is not performed. Recovery. Delete whatever is on the parameter line and try again. 5083 You cannot insert more lines when the last line contains text. Cause. You tried to insert a blank line in the body of the message you are creating, but the last line already contains text. Effect. No line is added. Recovery.
TRANSFER Errors (4000-6999) Recovery. No recovery possible. 5087 Correspondent name required. Cause. You did not enter your correspondent name on the LOGON screen. Effect. Your logon fails. Recovery. Enter your correspondent name in the field provided and try again. 5090 Move canceled. Cause. You marked an enclosure to be moved and then pressed a function key that canceled the move before it was completed. Effect. The move function fails. Recovery. Mark the enclosure and try again.
TRANSFER Errors (4000-6999) Effect. The requested function is not performed. Recovery. Try a different message or another function. 5094 This is not currently filed in any of your folders. Cause. You pressed SF7 to get the where-filed function, but this message is not filed in any of your folders. Effect. The message is not found. Recovery. No recovery possible. 5095 You cannot use REPLY, FORWARD, or COPY MAIL since this has no envelope. Cause.
TRANSFER Errors (4000-6999) Effect. The mail was not deleted. Recovery. Position your cursor at a folder name and try again. 5099 Delivery canceled. Cause. You asked to cancel a message that you had previously submitted for delivery. Effect. The delivery has been canceled. Recovery. Information only. No recovery necessary. 5100 Too many To recipients. Cause. You copied a piece of mail that has more primary recipients than can be displayed on the CREATE screen. Effect.
TRANSFER Errors (4000-6999) Effect. The truncated data is lost. Recovery. Ask the message sender to edit the message for shorter lines of text and send it again. 5106 INTERNAL ERROR: RELOAD-TEXT. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. Try the function that produced the error message again. If the error message continues to appear, report the error to the system manager. 5110 Posting Cause.
TRANSFER Errors (4000-6999) 5201 TMGR-HELP Internal error. Cause. An internal error in the TMANAGER client has occurred. Effect. The function you requested is not performed. Recovery. Try the function that produced the error message again. If the error message continues to appear, report the error to the system manager. 5220 No printer has been configured. Cause. You requested the print function, but no output device has been configured. Effect.
TRANSFER Errors (4000-6999) 5223 SmServ Request failure occurred. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the error code displayed at the right end of the advice line is 4990, request the function again (a timeout occurred). If the error persists or another code is displayed, report the error and the error code number displayed at the right end of the advice line to the Tandem Online Support Center.
TRANSFER Errors (4000-6999) Table 2-25. Message 5223—Detail Return Codes 2–120 Return Code Meaning 1 Version code in IPC header is not recognized by the server. 2 Session ID in the header is not for a valid session. 3 Service denied; reason unstated. 4 UOW header is invalid, the UOW is missing, or the UOW number is not valid. 5 Request is too long. The UOW is expecting more data than is in the interprocess message. 6 Reply is too long.
TRANSFER Errors (4000-6999) 5224 SmServ SEND failure occurred. Cause. An internal error has occurred. Effect. The function you requested is not performed. Recovery. If the status code displayed at the right end of the advice line is 4 or 12, request the function again. If the error persists or if any other error code is displayed, report the error and the status code to the system manager or the Tandem Online Support Center. Status codes include the following: Table 2-26.
TRANSFER Errors (4000-6999) 5226 No Data Base sample data found. Cause. You requested the TMANAGER Data Base Files function, but there are no database sample records in the Data Base Monitor sample file. Effect. No database samples are displayed. Recovery. The Data Base Monitor function is disabled or it is enabled but hasn't taken a sample yet. 5227 Unexpected File type. Cause.
TRANSFER Errors (4000-6999) Effect. No entries are retrieved. Recovery. Information only. 5231 No Queue sample data found for the current queue. Cause. You requested the Queue Entries function, but no sample data for the current queue was found. Effect. No sample data is retrieved. Recovery. If you expected queue sample data, make sure the Sampler server is running and the Queue sample interval is nonzero. 5232 No Item Id specified. Cause.
TRANSFER Errors (4000-6999) 5235 There are no more recipients. Cause. You asked to retrieve the next recipient from the group of recipients selected on the RECIPIENT SELECT screen, but there are no more recipients within the recipient group selected. Effect. No recipient is retrieved. Recovery. Select another group of recipients. 5236 No folder name specified. Cause. You requested the Folder Scan function from the Main Menu, but did not specify a folder name. Effect. No folders are retrieved.
TRANSFER Errors (4000-6999) To start retrieval on or after a specific recipient, enter the complete recipient name (including node name) or a pattern with node name in the Starting Recipient Name field, set any options desired, and press F4. 5600 Name processing error on correspondent name. Cause. An error has occurred while processing a correspondent name. Effect. The requested function is not performed. Recovery. A GUARDIAN 90 error number is displayed at the right of the advice line.
TRANSFER Errors (4000-6999) 5604 Correspondent's system invalid or unknown. Cause. The system name is either invalid or does not exist. Effect. The requested function is not performed. Recovery. Check to make sure you are using the proper spelling and format for the system name. If the problem persists, see your system manager. 5605 Security violation on correspondent. Cause. The logged-on correspondent is not permitted this operation. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) 5609 The correspondent has folders or distribution lists. Cause. You tried to delete a correspondent who still has folders or distribution lists. Effect. The correspondent was not deleted. Recovery. A correspondent name cannot be deleted until folders and distribution lists owned by the correspondent are deleted. Delete the folders and distribution lists and retry the operation. 5611 Network is down. Cause.
TRANSFER Errors (4000-6999) 5624 Invalid suffix on correspondent name. Cause. The suffix part of a recipient name is invalid. Effect. The requested function is not performed. Recovery. Correct the problems in the recipient name. Either there are illegal characters in the name, or only one parenthesis was included. (A suffix must be enclosed by parentheses.) 5625 Name processing error on distribution list. Cause. An error has occurred while processing a distribution list.
TRANSFER Errors (4000-6999) Effect. The name is not retrieved. Recovery. Use a different name. 5629 Distribution list's system invalid or unknown. Cause. You entered a fully qualified distribution list name, but the system name is either invalid or does not exist. Effect. The requested function is not performed. Recovery. Check the spelling of the distribution list name and try again. 5630 Security violation on distribution list. Cause. The logged-on correspondent is not permitted this operation.
TRANSFER Errors (4000-6999) Effect. The distribution list is not added. Recovery. Use the correct format for creating distribution lists, and make sure you add distribution lists only for defined correspondents. 5634 Distribution list is not empty; it still contains items. Cause. You cannot delete a distribution list name until all other named objects owned by the distribution list are deleted. Effect. The list is not deleted. Recovery. Delete the members of the list and then try again.
TRANSFER Errors (4000-6999) 5648 Ambiguous distribution list name. Cause. You entered an abbreviation for a distribution list name, but the name does not uniquely identify a distribution list. Effect. No list is retrieved. Recovery. Enter more characters for the distribution list name. 5649 Bad suffix on distribution list name. Cause. The suffix portion of a distribution list name is invalid. Only one parenthesis was included, or there are illegal characters. Effect.
TRANSFER Errors (4000-6999) Recovery. The name might have illegal characters or embedded blanks, or the name might be blank or too long. Check the spelling and try again. Note also that if the Defer Local Name Resolution flag in your TRANSFER correspondent profile is set to Y (yes), local member names must be fully qualified. 5653 Wrong type for a distribution list member. Cause. The name has been found but is not a valid type for use as a recipient. Effect. The requested function is not performed.
TRANSFER Errors (4000-6999) 5657 Distribution list member's name processor is down. Cause. The name processor for the member name specified has been temporarily stopped by the system operator. Effect. The requested function is not performed. Recovery. See the system operator to find out when the processor will be running again. Try the operation again when the processor is running. 5658 Distribution list member has no parent. Cause.
TRANSFER Errors (4000-6999) 5673 Ambiguous member name. Cause. You entered an abbreviation for a distribution list member name, and the name does not uniquely identify a correspondent or a distribution list. Effect. The requested function is not performed. Recovery. Enter more characters for the member name you are adding to the distribution list. 5674 Invalid suffix on member name. Cause. The suffix part of a recipient name is invalid. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) 5677 Folder name is invalid or blank. Cause. You pressed the file function key to file the current piece of mail, but the parameter line or File In field was blank or did not contain a valid folder name. Effect. The mail is not filed. Recovery. The name might contain illegal characters or embedded blanks, or it might be greater than 32 characters in length. Double-check to make sure you have specified a valid folder name. 5678 Wrong type for a folder name. Cause.
TRANSFER Errors (4000-6999) 5682 Folder's name processor is down. Cause. The name processor for the folder name specified has been temporarily stopped by the system operator. Effect. The requested function is not performed. Recovery. See the system operator to find out when the processor will be running again. Try the operation again when the processor is running. 5683 Folder has no parent. Cause.
TRANSFER Errors (4000-6999) Recovery. Type a different name to create a new folder. 5697 Folder must be on the same system. Cause. You tried to operate on a folder residing on another system, but the requested operation is restricted to folders on your node. Effect. The requested function is not performed. Recovery. Either log on to the other system to operate on the folder, or create a local folder on which to operate. 5698 Folder name is ambiguous . Cause.
TRANSFER Errors (4000-6999) 5727 Model depot name is not properly constructed. Cause. You entered a depot (correspondent) name in the Model Depot field, but the name is not a valid TRANSFER name. Effect. No model is invoked. Recovery. Check the spelling of the correspondent name you used as a model and try again. 5728 Wrong type for a model depot name. Cause. The name has been found, but it is not a valid type for a model depot name. Effect. No model is invoked. Recovery.
TRANSFER Errors (4000-6999) Recovery. Report this problem to the system manager. 5732 Model depot's name processor is down. Cause. The name processor for the model depot name specified has been taken down by the system operator. Effect. The requested function is not performed. Recovery. See the system operator to find out when the processor will be running again. 5733 INTERNAL ERROR. Report error to Tandem Computers Incorporated. Cause. Model depot name has no parent. Effect.
TRANSFER Errors (4000-6999) Effect. No model is invoked. Recovery. Note that the indicated model depot must exist at the same node as the correspondent being registered. Check the spelling of the system name you used and try again. 5748 Ambiguous model depot name. Cause. You entered an abbreviation for the model depot name, but the name does not uniquely identify a depot. Effect. No model is retrieved. Recovery. Enter more characters for the depot name. 5749 INTERNAL ERROR.
TRANSFER Errors (4000-6999) Effect. The requested function is not performed. Recovery. You might have included illegal characters in the name, have embedded blanks, have left the name blank, or have a name (or parts of a name) that are too long. Check the spelling of the correspondent name and try again. 5753 Wrong type for a recipient name Cause. The recipient name has been found, but it is not a correspondent or distribution list. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) 5757 Recipient name processor is down Cause. The name processor for the recipient name specified has been temporarily stopped by the system manager. Effect. The requested function is not performed. Recovery. See the system operator to find out when the processor will be running again. 5758 Recipient name -- no parent found Cause. The recipient name has no parent. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) Recovery. Use another recipient name or continue your processing. 5773 Ambiguous recipient name. Cause. You entered an abbreviation for a recipient name, but the name does not uniquely identify a recipient. Effect. No recipient is retrieved. Recovery. Enter more characters to further distinguish the recipient name, and try again. 5774 Invalid suffix on recipient name. Cause. The suffix part of a recipient name is invalid.
TRANSFER Errors (4000-6999) Effect. The requested function is not performed. Recovery. Make sure the name doesn’t contain illegal characters, incorrect spelling, or embedded blanks and is within the length limit of 32 characters. Then try again. 5778 Wrong type for a group name. Cause. The name has been found but is not a valid type. Effect. The name is not used. Recovery. Use a valid name in your request. 5779 Interest group's system invalid or unknown. Cause.
TRANSFER Errors (4000-6999) Recovery. See the system operator to find out when the processor will be running again. Try the operation again when the processor is running. 5783 Interest group has no parent directory entry. Cause. The root directory for the group name you specified is missing. Effect. The requested function is not performed. Recovery. Report this message to your system manager. 5786 Network is down. Cause. Processing a group name required access to names on other nodes.
TRANSFER Errors (4000-6999) Effect. No group is retrieved. Recovery. Enter more characters to distinguish the group name. 5800 A Text Server error has occurred. Cause. An error has occurred during communications with the Text Server. Effect. The requested function is not performed. Recovery. A error number indicating the cause of the error is displayed at the right of the advice line. Report the error to the system manager. 5801 Character map not found. See your system manager. Cause.
TRANSFER Errors (4000-6999) 5804 Line length specified in Text Server request is invalid. Cause. The line length specified in a Text Server request is invalid or not known to the Text Server. Effect. The requested function is not performed. Recovery. This message reflects an application coding error. Correct the line length specified in the Text Server request in the application. 5805 Line number supplied in Text Server request is invalid. Cause.
TRANSFER Errors (4000-6999) Recovery. Report the error and the error number displayed at the right end of the advice line to the system manager or the Tandem Online Support Center. 6101 Problem with character table. Cause. This is an internal error. Effect. The requested function is not performed. Recovery. Report the error and the error number displayed at the right end of the advice line to the system manager or the Tandem Online Support Center. 6102 Internal error converting a TRANSFER name.
TRANSFER Errors (4000-6999) Recovery. Report the error and the error number displayed at the right end of the advice line to the system manager or the Tandem Online Support Center. 6107 Error nnn getting record information . Cause. SPREP sent this error before stopping, to indicate that something is wrong with either TRANSFER or the GUARDIAN 90 file that SPREP attempted to access. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) 6110 Error nnn opening DEPSTAT during restart check. Cause. SPREP sent this error before stopping, to indicate that something is wrong with the DEPSTAT file that SPREP was attempting to open. The error message can be written to a log file or can be displayed on the terminal screen. Effect. The requested function is not performed. Recovery. The variable nnn represents the GUARDIAN 90 error number associated with this problem. Report this number to your system manager.
TRANSFER Errors (4000-6999) Recovery. The variable nnn represents the GUARDIAN 90 error number associated with this problem. Report this number to your system manager. The manager will have to correct the file error and run XCOOL again to set up SPREP correctly. 6114 Statistics internal error. Cause. This is an internal error found while TRANSFER was performing a depot statistics function. Effect. The requested function is not performed. Recovery.
TRANSFER Errors (4000-6999) Recovery. If you expected these statistics to be available on your system, ask the system manager about changing the current statistics configuration. 6118 System not configured to collect statistics. Cause. You requested statistics that are only available when statistics collection has been turned on. Effect. No statistics are retrieved. Recovery.
TRANSFER Errors (4000-6999) Effect. Statistics collection is not successfully configured. Recovery. The Number of Samples must be from 1 to 58. The Number of Averages must be from 0 to 57. The total of these two values must not be greater than 58. Enter valid values for these variables and update the configuration. 6123 Invalid SAMPLE INTERVAL. Cause. You supplied an invalid Sample Interval. Effect. Statistics collection is not successfully configured. Recovery.
TRANSFER Errors (4000-6999) 6127 Problem getting statistics configuration. See your system manager. Cause. A bad date/time was detected, either because the current system date/time is wrong or because it was previously set wrong while statistics were being collected. Effect. The requested function is not performed. Recovery. Report this error to your system manager. The system manager should immediately stop TRANSFER and examine the system date/time. If it is incorrect, it should be reset.
TRANSFER Errors (4000-6999) 6134 No statistics available for this request date. Cause. You specified a date when statistics were not being collected. Effect. No statistics are retrieved. Recovery. The date you specified may predate the time when statistics began to be collected on this system; or the date specified may fall in the future. You may be able to obtain statistics for the date you want by going to a different screen.
TRANSFER Errors (4000-6999) Recovery. Ask the system manager to include the depot in statistics collection for the next statistics collection configuration. Note 6138 If statistics from the current file are being requested and the depot has not been excluded, this is an internal error. Report this type of error to your system manager. Problem selecting statistics configuration. Cause. This is an internal error. Effect. No statistics are retrieved. Recovery.
TRANSFER Errors (4000-6999) (All new server processes in the affected server classes will use the new log control values.) Effect. SMSERV uses process names found in the TRANSFER GTRSTOP to determine which server processes to notify within a given server class. No server processes with the expected names were found running. Recovery. See the system manager. 6402 Log Control updated, but no process names found in the GTRSTOP file. Cause.
TRANSFER Errors (4000-6999) Recovery. See the system manager if you want your privileges modified. 6409 A GUARDIAN 90 error occurred while attempting to access a queue file. Cause. A GUARDIAN 90 error has occurred while a scheduler queue file was being accessed. Effect. The function you requested is not performed. Recovery. The GUARDIAN 90 error number is displayed at the right end of the advice line. Report this to the system manager.
3 PS MAIL Errors (7100-7999) 7101 Type correct correspondent name and password. Then press F16. Cause. You displayed the LOGON screen and tried to log on using a function key other than F16. Effect. The logon fails. Recovery. Enter your name and password again and use F16 to log on. 7102 Type correspondent name and password. Then press F16. Cause. You displayed the LOGON screen and tried to log on without typing the correct correspondent ID and password. Effect. The logon fails. Recovery.
PS MAIL Errors (7100-7999) Recovery. Either mark one or more folders or type a folder name on the options line. Don't try both at once. 7106 Type correct folder name, or erase and press F2 to read INBOX. Cause. You tried to read a folder from the MAIN screen, but typed an invalid or nonexistent folder name on the options line. Effect. No folder is scanned. Recovery. Enter a valid folder name and try again. 7107 Choose folders with marks. Then press F9 to print. Cause.
PS MAIL Errors (7100-7999) Effect. The desired function is not performed. Recovery. Check the correct format for the document and enter it following the AS keyword. 7112 Type correct language following TRANSLATE keyword. Cause. You tried to copy a message, an attachment, or text in the workspace to a PC file, or you tried to add a PC file. Either way, you tried to use the TRANSLATE keyword without a valid national language name. Effect. The desired function is not performed. Recovery.
PS MAIL Errors (7100-7999) Effect. No folder is deleted. Recovery. Either mark one or more folders or type a folder name on the options line. Don't try both at once. 7118 INBOX is permanent and cannot be deleted. Cause. You tried to delete a special folder. Effect. The INBOX is not deleted. Recovery. Delete all of the messages in the INBOX from the SCAN screen. 7119 Type correct folder name. Then press F7 to add. Cause.
PS MAIL Errors (7100-7999) 7126 There are no messages in the selected folder. Cause. You tried to handle a message in a folder on the MAIN screen, but the folder is empty. Effect. The desired function is not performed. Recovery. You may have filed the message in a different folder or thrown it out inadvertently. Check other folders and the WASTEBASKET folder to see if the message still exists. 7127 Choose message to format. Then press SF8. Cause.
PS MAIL Errors (7100-7999) Effect. Nothing is copied. Recovery. Select attachments by positioning the cursor next to it or marking it with a character. 7131 Choose attachments to delete. Then press F6. Cause. You tried to delete attachments on the SHOW ATTACHMENTS screen but did not choose any attachment to delete. Effect. Nothing is deleted. Recovery. Select a message by positioning the cursor next to it or marking it with a character. You can delete attachments to your own messages only.
PS MAIL Errors (7100-7999) 7135 No EXTRAS menu is available. Cause. You tried to display the EXTRAS screen, but either none has been supplied or there has been a problem. Effect. No EXTRAS screen is displayed. Recovery. Check the last four numbers of the error code and report the problem to the system manager. 7136 This is the last page. Cause. You pressed the NEXT PAGE key, but there is no next page to display. Effect. The screen is unchanged. Recovery. You are at the end of the file.
PS MAIL Errors (7100-7999) Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7140 Press F4 again to replace message in workspace. Cause. You tried to reply to a message on the READ or SCAN screen, but there is already a message in the workspace. Effect. The reply screen is not displayed. Recovery. You can either confirm the replacement of the text in the workspace with the reply or go to the CREATE screen and send the message in the workspace.
PS MAIL Errors (7100-7999) 7146 Choose messages to delete. Then press F6. Cause. You tried to delete messages from the SCAN screen but did not select any messages to delete. Effect. No message is deleted. Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7151 Type correct file name. Then press F7 to add. Cause. You tried to add a file as an attachment to the workspace, but the file name is invalid. Effect. The file is not added. Recovery.
PS MAIL Errors (7100-7999) Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7157 Choose messages to file. Then press F8. Cause. You tried to file messages on the SCAN screen but did not select any messages to file. Effect. No messages are filed. Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7158 Type correct folder name. Cause.
PS MAIL Errors (7100-7999) Effect. Nothing is printed. Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7165 Choose attachments to file. Then press F8. Cause. You tried to file attachments on the SHOW ATTACHMENTS screen but did not choose any attachments to file. Effect. Nothing is filed. Recovery. Select messages by positioning the cursor next to them or marking them with a character. 7167 Press SF11 again to cancel message. Cause.
PS MAIL Errors (7100-7999) 7171 Message previously canceled. Cause. You tried to cancel a message in the OUTLOG on the SCAN or READ screen that was already been canceled. Effect. No function is performed. Recovery. Information only. 7172 Message not sent. Cause. You are trying to cancel a message in the OUTLOG on the SCAN or READ screen that has not been sent. Effect. No function is performed. Recovery. Information only. 7177 Type only one file name to edit. Then press F12. Cause.
PS MAIL Errors (7100-7999) 7180 You cannot edit the file because of security. Cause. You tried to edit a file that is write-protected. Effect. TRANSFER will not open the file. Recovery. The owner of the file must change the file security before you can edit it. 7181 Choose attachments to print. Then press F9. Cause. You tried to print attachments on the SHOW ATTACHMENTS screen but did not select an attachment. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7187 IXF could not be started by PS MAIL. See your system manager. Cause. There was a problem starting IXF to transfer data. Effect. The function you requested is not performed. Recovery. The last four numbers on the advice line indicate the problem. Report the error and the error code to the system manager. 7190 The formatter could not be started. See your system manager. Cause. There was a problem starting the text formatter. Effect.
PS MAIL Errors (7100-7999) Recovery. The last four numbers on the advice line indicate the problem. Report the error and the error code to the system manager. 7194 Destination name is invalid. Press F14 and check profile defaults. Cause. You tried to print, format, or copy a message, an attachment, or the text in the workspace, using the profile defaults, but there is a problem with the values in the profile. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7199 Enable the Exec Function in the terminal emulator configuration. Cause. You attempted an IXF transfer, but the terminal emulator does not have the Exec Function set to ON. Effect. The function you wanted is not performed. Recovery. You must update your emulator configuration. 7202 Choose attachment to edit. Then press F12. Cause. You tried to edit attachments on the SHOW ATTACHMENTS screen but did not select an attachment to edit. Effect.
PS MAIL Errors (7100-7999) Effect. No lines are inserted. Recovery. Insert lines only in the text area. 7207 Workspace is full. Press F12 to continue creating mail. Cause. You tried to insert lines on the CREATE screen, but the last line on the second page contains text. Effect. No lines are inserted. Recovery. You must either delete lines in the text area or invoke the extended editor to get a larger text area. 7208 Move cursor to text. Then press DELETE LINE. Cause.
PS MAIL Errors (7100-7999) 7212 Names may not be merged into folders. Cause. You are trying to merge correspondent names from one distribution list to another and the list name typed on the options line belongs to a folder. Effect. The names are not merged. Recovery. Type another list name. 7213 Mark one choice for copying recipients. Cause. On the PROFILE screen, no choice is marked for “Copy TO or CC List on Reply.” Effect. The function requested is not performed. Recovery. Mark only one choice.
PS MAIL Errors (7100-7999) 7219 Type correct distribution list name. Then press F7 to add. Cause. You tried to add a distribution list on the DISTRIBUTION LISTS screen but typed an invalid list name on the options line. Effect. No list is added. Recovery. Enter a valid name and try again. 7220 Names may not be merged into a folder. Cause. You tried to create a distribution list while merging member names from the DISTRIBUTION NAMES screen with a name belonging to a folder. Effect.
PS MAIL Errors (7100-7999) Recovery. Select folders by positioning the cursor next to them or marking them with a character. 7228 Press F6 again to delete list and names. Cause. You tried to delete distribution lists on the DISTRIBUTION LISTS screen that are not empty. Effect. The system asks for confirmation. Recovery. You must confirm your request. 7229 OUTLOG is permanent and cannot be deleted. Cause. You tried to delete a special folder. Effect. The folder is not deleted. Recovery.
PS MAIL Errors (7100-7999) Effect. No message is added. Recovery. Select a message by positioning the cursor next to it or marking it with a character. 7235 Choose message to edit. Then press F12. Cause. You tried to edit a message from the SCAN screen but did not select a message to edit. Effect. The function you wanted is not performed. Recovery. Select a message by positioning the cursor next to it or marking it with a character. 7237 You have a message in the workspace. Press SF16 again to exit.
PS MAIL Errors (7100-7999) 7241 Type correct correspondent name. Then press F7 to add. Cause. You tried to add correspondent or distribution list names as members of a distribution list on the DISTRIBUTION NAMES screen, but there is an error in the name you are trying to add. (For example, the name is invalid or nonexistent). Effect. The requested function is not performed. Recovery. Correct the erroneous name on the options line. 7243 You cannot add this list because of security. Cause.
PS MAIL Errors (7100-7999) Effect. No member is deleted. Recovery. Operate only on your own lists. 7247 Correct your GUARDIAN ID and password in your profile in ADMIN. Cause. You tried to perform a function that requires the creation of a temporary GUARDIAN 90 file. This requires that the depot profile contain a valid GUARDIAN 90 ID and password. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7252 The workspace has no attachments. Cause. You tried to show attachments to the workspace when there are no attachments. Effect. The function you requested is not performed. Recovery. Attach the items you want and retry the function. 7254 You cannot file messages to a distribution list. Cause. You tried to file a message, an attachment, or text in the workspace to a name that is owned by a distribution list. Effect. The requested function is not performed. Recovery.
PS MAIL Errors (7100-7999) 7258 You cannot read a distribution list on another node. Cause. You tried to read a distribution list that belongs to a correspondent on another node. TRANSFER does not allow this. Effect. The requested function is not performed. Recovery. Ask the owner of the remote distribution list for a copy of the list; or read a distribution list on your own node. 7259 Your terminal is the wrong type for your text editor. Cause.
PS MAIL Errors (7100-7999) Effect. The function you requested is not performed. Recovery. You can only use one method for selecting lists. 7267 The folder has already been deleted. Cause. You tried to delete a folder on the MAIN screen that has already been deleted by another correspondent logged on to the same depot. Effect. The function you requested is not performed. Recovery. Information only. 7268 The formatter was unable to format the message. Cause.
PS MAIL Errors (7100-7999) Recovery. The last four numbers on the advice line indicate the problem. Report the error and the error code to the system manager. 7272 The data is temporarily unavailable. Try again later. Cause. You tried to read or scan a message in the INBOX while the message was being distributed on the node. Effect. The requested function is not performed. Recovery. The message is temporarily unavailable because the descriptor is locked.
PS MAIL Errors (7100-7999) 7278 This is the first page. Cause. You requested the first page of a list when it is already being displayed. Effect. Information only. Recovery. Use NEXT PAGE to page through the file. 7279 There is a character that cannot be displayed. Cause. You are trying to display a message or attachment that contains data that the PATHWAY TCP cannot display. Effect. The message will not be displayed. Recovery. You must print, format, or copy the message to read it.
PS MAIL Errors (7100-7999) 7283 Text formatter name cannot contain a system name. Cause. You are trying to update the default text formatter on the PROFILE screen and the name contains a system name. Effect. The update fails. Recovery. Remove the system name to ensure that the formatter is on a local node. 7284 Text formatter volume does not exist. Cause. You are trying to update the default text formatter on the PROFILE screen, but the volume name does not exist. Effect. The update fails. Recovery.
PS MAIL Errors (7100-7999) 7288 Type correct extended editor volume and subvolume. Cause. You are trying to update the default extended editor on the PROFILE screen, but the in the name is invalid. Effect. The update fails. Recovery. Check the name and try again. 7289 Extended editor name cannot contain a system name. Cause. You are trying to update the default extended editor on the PROFILE screen and the name contains a system name. Effect. The update fails. Recovery.
PS MAIL Errors (7100-7999) 7293 Extended editor name cannot be blank. Cause. You are trying to update the default extended editor on the PROFILE screen and left the extended editor field blank. Effect. The update fails. Recovery. This field must contain a fully qualified editor name in the form . 7294 Type correct node name. Cause. You are trying to update the default node name on the PROFILE screen, but have entered an invalid name. Effect. The update fails. Recovery.
PS MAIL Errors (7100-7999) Recovery. You must enter the current password before it can be replaced with the new one. 7300 Choose a list name to read. Cause. You are trying to read a distribution list on the DISTRIBUTION NAMES screen and did not select a list to read. Effect. The requested function is not performed. Recovery. You must select a list, either by positioning the cursor next to the list name or by marking the list name with a character. 7301 F1 is not active on this screen. Cause.
PS MAIL Errors (7100-7999) 7305 F5 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7306 F6 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7307 F7 is not active on this screen. Cause.
PS MAIL Errors (7100-7999) Recovery. Try a different function. 7311 F11 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7312 F12 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function.
PS MAIL Errors (7100-7999) Effect. The function you requested is not performed. Recovery. Try a different function. 7317 SF1 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7318 SF2 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7322 SF6 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7323 SF7 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7324 SF8 is not active on this screen. Cause.
PS MAIL Errors (7100-7999) Recovery. Try a different function. 7328 SF12 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function. 7329 SF13 is not active on this screen. Cause. You have tried to use a function that does not work on this screen. Effect. The function you requested is not performed. Recovery. Try a different function.
PS MAIL Errors (7100-7999) Effect. No lines are inserted. Recovery. Try a different function. 7334 You cannot delete lines on this screen. Cause. You tried to delete lines on a screen other than the CREATE screen. Effect. No lines are deleted. Recovery. Try a different function. 7335 This message has no attachments. Cause. You tried to show the attachments of a message selected on the SCAN screen or being read on the READ screen that has no attachments. Effect. No attachments are shown. Recovery.
PS MAIL Errors (7100-7999) 7353 Press SF9 again to copy folder. Cause. You are trying to copy a folder. Effect. The system asks for confirmation. Recovery. You must confirm your request. 7354 Type correct folder name. Then press F8 to file. Cause. You are trying to file a message, an attachment, or text in the workspace and have entered an invalid folder name on the options line. Effect. The requested function is not performed. Recovery.
PS MAIL Errors (7100-7999) 7361 Press F8 again to file folders. Cause. You are trying to file certain folders on the MAIN screen to a destination folder typed on the options line. Effect. The system asks for confirmation. Recovery. You must confirm your request. 7376 This name is already used as a folder name. Cause.
PS MAIL Errors (7100-7999) 7379 Type only one distribution list name. Then press F8 to merge. Cause. You are trying to merge distribution lists on the DISTRIBUTION LISTS screen or distribution list member names on the DISTRIBUTION NAMES screen but have entered more than one target distribution list name on the options line. Effect. The requested function is not performed. Recovery. Enter one name only for the target list on the options line.
PS MAIL Errors (7100-7999) 7387 Press F6 again to delete lists and names. Cause. You are trying to delete distribution lists from the DISTRIBUTION LISTS screen. Because the selected lists contain member names, confirmation is necessary before deletion. Effect. The system asks for confirmation. Recovery. You must confirm the deletion. 7388 The selected distribution lists are empty. Cause.
PS MAIL Errors (7100-7999) Recovery. Select names to merge by positioning the cursor next to them or marking them with a character. 7394 Type destination list name on options line. Then press F8 to merge. Cause. You are trying to merge member names into a distribution list on the DISTRIBUTION NAMES screen but did not enter a destination list on the options line. Effect. The list is not created. Recovery. Type a valid destination list name on the options line.
PS MAIL Errors (7100-7999) Effect. No folders are copied. Recovery. Select folder names by positioning the cursor next to them or marking them with a character. 7407 Folder does not exist. Press F6 again to add it. Cause. You are trying to delete a message, an attachment, or text in the workspace and to file it simultaneously in the folder typed on the options line. The folder name does not exist, so you must confirm that it should be created. Effect. The system asks for confirmation. Recovery.
PS MAIL Errors (7100-7999) 7422 Press NEXT PAGE for more workspace and to set delivery window Cause. You are creating a message in the workspace and have run out of space on the first page. Effect. The additional text will not be added. Recovery. Press NEXT PAGE for more workspace. 7423 Mark attachments, or type only one file name. Then press F7 to add.. Cause.
PS MAIL Errors (7100-7999) 7426 Choose attachments for reply. Then press F4. Cause. You have the attachments to a message displayed on the SHOW ATTACHMENTS screen and you're trying to reply, but you haven't selected an attachment. Effect. The requested function is not performed. Recovery. Select at least one attachment to reply to. 7427 Choose attachments to forward. Then press F5. Cause.
PS MAIL Errors (7100-7999) Effect. No messages are printed. Recovery. Choose a folder with messages to print. 7439 There are no messages in the folders to print. Cause. You chose empty folders on the MAIN screen and pressed F9 to print the messages in them. Effect. No messages are printed. Recovery. Choose folders with messages to print. 7440 Press F9 again to print folders. Cause. You chose some folders on the MAIN screen and pressed F9 to print the messages in them. Effect.
PS MAIL Errors (7100-7999) Recovery. Select only one message when showing attachments. 7444 Press F6 again to delete all the attachments Cause. You are trying to delete all the attachments to a message. Effect. The system asks for confirmation. Recovery. You must confirm the request. 7445 Type a file name on the options line. Then press SF9 to copy. Cause. You selected messages or attachments to copy but did not type a destination file name on the options line. Effect. Nothing is copied. Recovery.
PS MAIL Errors (7100-7999) 7449 The device name typed on the options line does not exist. Cause. You tried to print or copy a message, an attachment, or text in the workspace but typed an invalid device name on the options line. Effect. The requested function is not performed. Recovery. Correct the options line and try the action again. 7451 Choose folders with marks. Then press SF8 to format. Cause. You are trying to format folders on the MAIN screen but did not select any folders to format. Effect.
PS MAIL Errors (7100-7999) Recovery. Go to the PROFILE screen and change the default system to a valid system. 7456 System does not exist. Correct options line or PS MAIL profile. Cause. PS MAIL is trying to expand a file name using the default system name in the depot profile. This is done whenever a temporary folder is being created (during printing, copying, editing, formatting) or when adding a file as an attachment to the workspace. Effect. The requested function is not performed. Recovery.
PS MAIL Errors (7100-7999) Effect. The requested function is not performed. Recovery. Request the function again. If the error persists, report the error code and the return code to the system manager or to the Tandem Online Support Center. The following are return codes: 3002—A free control block cannot be found, generally because the initial configuration of the terminal control process (TCP) did not provide enough control blocks.
PS MAIL Errors (7100-7999) 7465 Unable to access FORMAT Server. Try again or see your system manager. Cause. The FORMAT Server is unavailable because system resources are not available or linkage to the FORMAT Server has been denied. Effect. The requested function is not performed. Recovery. Request the function again. If the error persists, report the error code and the return code to the system manager or to the Tandem Online Support Center.
PS MAIL Errors (7100-7999) 7468 A remote FORMAT Server file error occurred. See your system manager. Cause. A file system error occurred while you were accessing a remote FORMAT Server, or a timeout occurred. Effect. The function you requested is not performed. Recovery. Try the function again. If the error persists, report the error and the status code to the system manager or the Tandem Online Support Center.
PS MAIL Errors (7100-7999) 7473 Unable to access GFILE Server. Try again or see your system manager. Cause. The GFILE Server is unavailable because system resources are not available or linkage to the GFILE Server has been denied. Effect. The requested function is not performed. Recovery. Request the function again. If the error persists, report the error code and the return code to the system manager or to the Online Support Center.
PS MAIL Errors (7100-7999) 7476 A remote GFILE Server file error occurred. See your system manager. Cause. A file system error occurred while you were accessing a remote GFILE Server, or a timeout occurred. Effect. The function you requested is not performed. Recovery. Try the function again. If the error persists, report the error and the status code to the system manager or the Tandem Online Support Center.
PS MAIL Errors (7100-7999) 7479 A PROCESS Server file error occurred. See your system manager. Cause. A file system error occurred while you were accessing the PROCESS Server or a timeout occurred. Effect. The function you requested is not performed. Recovery. Try the function again. If the error persists, report the error and the status code to the system manager or the Tandem Online Support Center.
PS MAIL Errors (7100-7999) 7483 Choose only one message. Then press SF12 to see the envelope. Cause. You pressed SF12 on the SCAN screen to display a message envelope, but you marked more than one message. Effect. The requested function is not performed. Recovery. Select only one message. 7484 Choose an attachment. Then press SF12 to see the envelope. Cause. You pressed SF12 on the SCAN screen to display an attachment envelope, but you didn't choose an attachment. Effect.
PS MAIL Errors (7100-7999) 7488 Press a function key or else you will be logged off. Cause. You have left the terminal idle for the length of time specified on the PROFILE screen. Effect. You are about to logged off automatically. Recovery. Press a function key to keep from being automatically logged off of PS MAIL in 30 seconds. 7489 Correct the default vol.subvol on the PROFILE Screen. Cause.
PS MAIL Errors (7100-7999) 7492 Invalid system name in the filename or on the PROFILE screen. Cause. You have typed a GUARDIAN 90 file name on the options line to add, copy to, or edit and it has an invalid system name, or the default in the profile is invalid. Effect. The function you requested is not performed. Recovery. If PS MAIL is using the default, you may either correctly fully qualify the name or correct the system name on the PROFILE screen.
PS MAIL Errors (7100-7999) 3004—The request to PATHMON for a link to the TEXT Server has been denied for indeterminate reasons, and the TCP has no previously established links to the TEXT Server. 7497 TEXT Server is frozen. See your system manager. Cause. The TEXT Server is frozen and must be thawed in PATHCOM. Effect. The requested function is not performed. Recovery. Report the problem to the system manager. 7498 A TEXT Server file error occurred. See your system manager. Cause.
PS MAIL Errors (7100-7999) 7501 Choose a name with a mark or type it on options line--not both. Cause. You pressed SF3 on the DIRECTORY screen and marked a name as well as typing it on the options line. Effect. No name is selected. Recovery. Either mark a name or type it on the options line. Don't try both at once. 7502 Choose only one name. Then press SF3 for details. Cause. You pressed SF3 on the DIRECTORY screen and marked more than one name. Effect. No name is selected. Recovery. Choose one name.
PS MAIL Errors (7100-7999) 7508 Type country name. Cause. You are trying to address a message to an X400 correspondent, but you have not included the country name. Effect. The function you requested is not performed. Recovery. Type the correct country name for the X400 correspondent. 7509 Type ADMIN domain name Cause. You are trying to address a message to an X400 correspondent, but you have not included the ADMIN domain name. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7513 There are no messages in the folders to file. Cause. You chose empty folders on the MAIN screen and pressed F8 to file their messages elsewhere. Effect. The function you requested is not performed. Recovery. Check to see if the messages you want are filed elsewhere. Then file them in the folders you want. 7514 Name not found Cause. You are searching for directory information, but the system is unable to locate the name in the database. Effect.
PS MAIL Errors (7100-7999) Recovery. Select the X400 name you want to display. 7517 Choose only one X400 name to display. Cause. You are trying to get detailed information about more than one X400 correspondent at a time. Effect. The function you requested is not performed. Recovery. Choose only one X400 correspondent to display. 7518 Type correspondent name. Then press SF3 for details. Cause.
PS MAIL Errors (7100-7999) Effect. Information only. Recovery. No recovery necessary. 7522 Type correct date to start delivery. Cause. A time to start delivery has been typed but no corresponding date was typed. Effect. The function you requested is not performed. Recovery. Enter both date and time and retry. 7523 Type correct time to start delivery. Cause. A date to start delivery has been typed but no corresponding time was typed. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7527 Type correct time to stop delivery. Cause. A date to stop delivery has been typed but no corresponding time was typed. Effect. The function you requested is not performed. Recovery. Enter both date and time and retry. 7528 Stop delivery date is invalid. Cause. An incorrect date to stop message delivery has been typed on the second page of the CREATE screen. Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) 7532 Message expiration date is invalid. Cause. An incorrect date for message expiration has been typed on the second page of the CREATE screen. Effect. The function you requested is not performed. Recovery. The expiration date must be in the form yy-mm-dd where yy is the year, mm is the month, and dd is the day. 7533 Message expiration time is invalid. Cause. An incorrect time for message expiration has been typed on the second page of the CREATE screen. Effect.
PS MAIL Errors (7100-7999) Recovery. See your system manager. 7537 Press SF4 for the X400 Screen, then delete the member name. Cause. You are trying to delete an X400 correspondent from a screen other than the X400 Name screen. Effect. The name is not deleted. Recovery. Press SF4 for the X400 name screen and then delete the name. 7538 MAXPATHWAYS in the TCP must be increased. See your system manager. Cause. MAXPATHWAYS in the TCP is full Effect. The function you requested is not performed. Recovery.
PS MAIL Errors (7100-7999) Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7703 INTERNAL ERROR: COPY-MAIL Cause. An internal error occurred while you were printing, filing, formatting, or filing text in the workspace. Effect. The requested function is not performed. Recovery. Try the action again.
PS MAIL Errors (7100-7999) 7707 INTERNAL ERROR: DIST-LIST Cause. An internal error occurred while you were handling distribution lists. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7708 INTERNAL ERROR: DLIST-CONTENTS Cause.
PS MAIL Errors (7100-7999) 7713 INTERNAL ERROR: FILE-ITEM Cause. An internal error occurred while you were trying to file text in the workspace, a message, or an attachment. Effect. No text is filed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7714 INTERNAL ERROR: FOLDER-MANAGE Cause.
PS MAIL Errors (7100-7999) 7717 INTERNAL ERROR: GET-NEXT-ITEM Cause. An internal error occurred while you were trying to get the ID of the next item in a folder. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7718 INTERNAL ERROR: GET-SCREEN-DATA Cause.
PS MAIL Errors (7100-7999) 7721 INTERNAL ERROR: MAIN-ASSIST Cause. An internal error occurred while you were getting the folder names for display on the MAIN screen. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7722 INTERNAL ERROR: MAIN-FUNCTIONS Cause.
PS MAIL Errors (7100-7999) 7725 INTERNAL ERROR: PRINT ITEM Cause. An internal error occurred while you were trying to print the text in the workspace, a message, or an attachment. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7726 INTERNAL ERROR: PRINT-ITEM-LIST Cause.
PS MAIL Errors (7100-7999) 7729 INTERNAL ERROR: READ-ATTACHMENT-ASSIST Cause. An internal error occurred while you were trying to get the envelope or text of an attachment to display. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7730 INTERNAL ERROR: READ-ATTACHMENT Cause.
PS MAIL Errors (7100-7999) 7733 INTERNAL ERROR: RELOAD-TEXT Cause. An internal error occurred while you were trying to reload the text after you used the external editor to edit the workspace. Effect. The text is not reloaded. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7734 INTERNAL ERROR: REPLY-FORWARD Cause.
PS MAIL Errors (7100-7999) 7737 INTERNAL ERROR: SCAN-FUNCTIONS Cause. An internal error occurred while you were trying to print, format, copy, file, or delete a list of messages. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7739 INTERNAL ERROR: SELECT Cause.
PS MAIL Errors (7100-7999) 7742 INTERNAL ERROR: SHOW-ATTACHMENTS Cause. An internal error occurred while you were showing the attachments to a message or to the workspace. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7743 INTERNAL ERROR: SHOW-FUNCTIONS Cause.
PS MAIL Errors (7100-7999) 7746 INTERNAL ERROR: COPY-ITEM Cause. An internal error occurred while you were trying to file, print, copy, or format the text in the workspace. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7747 INTERNAL ERROR: FORMAT-ITEM Cause.
PS MAIL Errors (7100-7999) 7750 INTERNAL ERROR: DLIST-FUNCTIONS Cause. An internal error occurred while you were trying to add, delete, or merge distribution lists. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error. 7751 INTERNAL ERROR: ENVELOPE Cause.
PS MAIL Errors (7100-7999) 7754 INTERNAL ERROR: X400 NAME. Cause. An internal error occurred while displaying X400 information. Effect. The requested function is not performed. Recovery. Try the action again. If the problem persists, report the error and the last four numbers on the advice line to the system manager. The last four numbers give the subcode for the PATHWAY CALL error.
