TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
2–94 40592 Tandem Computers Incorporated
5012
TISERV SEND failure.
Cause. An internal error has occurred.
Effect. The function you requested is not performed.
Recovery. If the status code displayed at the right end of the advice line is 4 or 12,
request the function again. If the error persists or if any other error code is displayed,
report the error and the status code to the system manager or the Tandem Online
Support Center.
Status codes are shown in Table 2-19.
Table 2-19. Message 5012—Status Codes
Value Meaning
1 Server class frozen. The system manager has blocked use of the server.
2,3 Resource unavailable. The PATHWAY configuration is insufficient.
4 Link denied for indeterminate reasons.
5 Server class undefined. A PATHWAY or TRANSFER configuration problem.
6 Illegal server class name. Might be a TRANSFER configuration problem.
7,8 Message or reply too large. Might be an internal error in TRANSFER.
10 Undefined reply. Might be an internal error.
11 Reply length invalid. Might be an internal error.
12 I/O error while talking to server.
13 TMF mode violation. Might be an internal error.
An internal error might be caused by customer-supplied interface modules. For a
complete description of SEND error codes, see the PATHWAY SCREEN COBOL
Reference Manual.
5013
TISERV Request error.
Cause. An internal error has occurred.
Effect. The function you requested is not performed.
Recovery. If the error code displayed at the right end of the advice line is 4990, request
the function again (a timeout occurred). If the error persists or another code is
displayed, report the error and the error code number displayed at the right end of the
advice line to the Tandem Online Support Center. Table 2-20 shows return codes.