TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
40592 Tandem Computers Incorporated 2–121
5224
SmServ SEND failure occurred.
Cause. An internal error has occurred.
Effect. The function you requested is not performed.
Recovery. If the status code displayed at the right end of the advice line is 4 or 12,
request the function again. If the error persists or if any other error code is displayed,
report the error and the status code to the system manager or the Tandem Online
Support Center.
Status codes include the following:
Table 2-26. Message 5224—Status Codes
Value Meaning
1 Server class frozen. The system manager has blocked use of the server.
2,3 Resource unavailable. The PATHWAY configuration is insufficient.
4 Link denied for indeterminate reasons.
5 Server class undefined. A PATHWAY or TRANSFER configuration problem.
6 Illegal server class name. Might be a TRANSFER configuration problem.
7,8 Message or reply too large. Might be an internal error in TRANSFER.
10 Undefined reply. Might be an internal error.
11 Reply length invalid. Might be an internal error.
12 I/O error while talking to server.
13 TMF mode violation. Might be an internal error.
An internal error might be caused by customer-supplied interface modules. For a
complete description of SEND error codes, see the PATHWAY SCREEN COBOL
Reference Manual.
5225
Log Control values updated.
Cause. The values you changed on the TMANAGER LOG CONTROL screen have
been successfully updated in the TRANSFER Namespace.
Effect. Information only.
Recovery. No recovery necessary.