TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
40592 Tandem Computers Incorporated 2–139
Recovery. Report this problem to the system manager.
5732
Model depot's name processor is down.
Cause. The name processor for the model depot name specified has been taken down
by the system operator.
Effect. The requested function is not performed.
Recovery. See the system operator to find out when the processor will be running
again.
5733
INTERNAL ERROR. Report error to Tandem Computers Incorporated.
Cause. Model depot name has no parent.
Effect. The requested function is not performed.
Recovery. Report this problem to the system manager or the Tandem Online Support
Center.
5736
Network is down.
Cause. Processing a model name required access to names on other nodes. The
network is down.
Effect. The request cannot be processed.
Recovery. Contact your system manager for an estimate of when the network will be
in operation. Then try the operation again when the network is running.
5737
INTERNAL ERROR. Report this error to Tandem Computers Incorporated.
Cause. Model depot name already exists.
Effect. The requested function is not performed.
Recovery. Report this problem to the system manager or the Tandem Online Support
Center.
5747
Model depot must be on your system.
Cause. You entered a depot (correspondent) name in the Model Depot field, but the
depot is not defined at your node.