TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
40592 Tandem Computers Incorporated 2–153
Effect. Statistics collection is not successfully configured.
Recovery. The Number of Samples must be from 1 to 58. The Number of Averages
must be from 0 to 57. The total of these two values must not be greater than 58. Enter
valid values for these variables and update the configuration.
6123
Invalid SAMPLE INTERVAL.
Cause. You supplied an invalid Sample Interval.
Effect. Statistics collection is not successfully configured.
Recovery. The Sample Interval is the amount of time that elapses between the
collection of two samples.
The value should be a number of 1 to 4 digits followed by the letter D, H, or M,
indicating days, hours, or minutes, respectively.
6124
Problem accessing statistics.
Cause. This is an internal error.
Effect. The requested function is not performed.
Recovery. Report the message and the error number displayed at the right end of the
advice line to the system manager or the Tandem Online Support Center.
6125
Invalid START TIME.
Cause. You specified an invalid Start Time.
Effect. The requested function is not performed.
Recovery. Make sure the values given for hour are in the range of 0 to 23 and the
values given for minute are in the range of 0 to 59.
6126
Problem accessing statistics in DEPSTAT file.
Cause. An internal error occurred when statistics in the DEPSTAT file were accessed.
Effect. The requested function is not performed.
Recovery. Report the error and the error number displayed at the right end of the
advice line to the system manager or the Tandem Online Support Center.