TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
2–36 40592 Tandem Computers Incorporated
4300
Old password is not correct.
Cause. You tried to change your TRANSFER password, but the password you entered
in the Change Password From field does not match the current password in your
TRANSFER correspondent profile.
Effect. Your password does not change.
Recovery. Type your existing password in the Change Password From field exactly as
you originally typed it; uppercase and lowercase letters are not interchangeable. If the
error persists, ask your system manager to enter a new password for you.
(The administrator does not have to type a password in the Change Password From
field before entering a new password for you.)
4302
These fields cannot be updated.
Cause. This message reflects a Tandem internal error.
Effect. The function you requested is not performed.
Recovery. Ask your system manager to report the problem to the Tandem Online
Support Center.
4303
Window is out of allowed range.
Cause. You have made one of two errors:
1. You entered a value of zero in the Delivery Ends field on the TRANSFER
correspondent profile; this field must be set to a value greater than zero. If you set
your default delivery specifications to values that are not within the system
control limits, TRANSFER adjusts the applicable values when you send a message.
2. As a system manager with system administrative write privileges, you tried to
update the TRANSFER system control delivery specifications incorrectly:
The Maximum Package Lifespan field is set to zero.
The Minimum Delivery Window field is set to zero.
The sum of the Minimum Delivery Window and the Minimum Expiration
Window fields is greater than the Maximum Package Lifespan field.
Effect. The function you requested is not performed.
Recovery. Review the values entered in the potentially applicable fields and ascertain
that they are within the acceptable ranges. Then try your operation again.