TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
40592 Tandem Computers Incorporated 2–39
Effect. The function you requested is not performed.
Recovery. This is a TMANAGER message intended for the system manager. The
value supplied for DataBase File threshold is interpreted as a percentage of file
capacity, where 100 is 100 percent. A value of 0 is interpreted as “no capacity
threshold.” Enter a value within the range 0 to 100.
4317
A value other than 0 through 4 has been supplied for Queue Type.
Cause. An incorrect value was supplied for the Queue type, which indicates the queue
to be monitored for a given type of work.
Effect. The function you requested is not performed.
Recovery. This is a TMANAGER message intended for the system manager. Specify
one of the following values in the Queue field when configuring Scheduler Queue
threshold values:
Table 2-2. Message 4317—Queue Type Values
Value Meaning
0 No file or record
1 Ready File
2 Time File
3 Net File
4 Held Ready records
4318
Scheduler work types through 12, 1001, and 9999 are valid.
Cause. You specified a value for work type that did not correspond to a defined type
of Scheduler work.
Effect. The function you requested is not performed.
Recovery. This is a TMANAGER message intended for the system manager. The
value specified in the Work field indicates which of 15 predefined types of work
should be monitored in the scheduler queue specified in the adjacent Queue field. The
types of work shown in Table 2-3 are defined.