TRANSFER Administration Guide Volume 2 Messages Manual

TRANSFER Errors (4000-6999)
40592 Tandem Computers Incorporated 2–81
4628
Character set problem.
Cause. You tried to send a package to a recipient on a remote node, but the remote
node TRANSFER configuration does not support the character set used in your
package.
Effect. Your package is not delivered.
Recovery. Send a package that uses the character set supported on the remote node.
4629
GMT incorrect.
Cause. You tried to send a message to a remote node, but the system time-of-day
settings on your node and the remote node are more than 15 minutes apart. One or
both time-of-day settings are incorrect.
Effect. Your message is not delivered.
Recovery. Report the problem to the system managers for the two nodes. They can
determine whether one or both nodes must be reset.
4630
X.400 not supported.
Cause. You tried to send a package that contains X400 information to a recipient on a
remote node, but the remote node TRANSFER configuration does not support X400.
Effect. Your package is not delivered.
Recovery. Check with your system manager or the system manager for the remote
node as to whether X400 can be supported.
4631
X.400 not configured.
Cause. You tried to send a package that contains X400 information to a recipient on a
remote node, but X400 is not configured for the remote node.
Effect. Your package is not delivered.
Recovery. Check with your system manager or the system manager for the remote
node as to whether X400 can be configured.
4900
System file error. See your system manager.
Cause. A GUARDIAN 90 file error has occurred on the file.