TRANSFER Installation and Management Guide

TWORK
Customizing a TRANSFER System
7–16 068837, Update 1 to 013198 Tandem Computers Incorporated
Table 7-6. TWORK PARAM Specifications (Page 2 of 2)
Parameter/Default Definition
EXPANDPRIORITY
Default = 0
Maximum = 150
Priority in the EXPAND line when transporting packages to
remote TRECV processes and when there is remote
cancellation.
If a value of 0 is specified, SETMODE is not performed and
the normal EXPAND default is used. If the value specified is
not in the range of 0 to 150, the value is set to 0 and the
priority setting is not changed; a message in the TWORK
OUT file indicates this.
RMTTSCHEDHOLD
Default = 4
Minimum = 1
Number of minutes a remote TSCHED is left open and idle
before being closed.
TWORK opens TSCHEDs at remote nodes to establish
connections between local TWORK servers and remote
TRECV servers for network operations. A TWORK can have
up to 20 TSCHEDs open. If another TSCHED is required,
the TSCHED that has been idle longest is closed. A
TSCHED is also closed if it is idle for five minutes.