TRANSFER Installation and Management Guide

DEPOT STATISTICS CONFIGURATION Screen
Using ADMIN to Administer TRANSFER
13198 Tandem Computers Incorporated 9–17
The DEPOT
STATISTICS
CONFIGURATION
Screen
There are two versions of the DEPOT STATISTICS CONFIGURATION screen: one
that allows all users to view the current configuration for storage statistics and one
that allows you, with your administrative write privileges, to set the next
configuration for depot storage statistics.
As the system manager, you can type in all the fields under Next Config on the screen
and press F8 to update the settings. These next configuration values become the
default configuration only when the TRANSFER system is stopped and restarted.
When your system is initialized, you see these default values on your DEPOT
STATISTICS CONFIGURATION screen unless you have changed them in your
DEFINETR file.
Figure 9-4 illustrates the DEPOT STATISTICS CONFIGURATION screen.
Figure 9-4. ADMIN DEPOT STATISTICS CONFIGURATION Screen
ADMIN Depot Statistics Configuration
Current Config Next Config
---------------- ---------------------
Collect Statistics: N Y Y = Yes, N = No
Statistics Ready: N
Count Items When Examined: Y N Y = Yes, N = No
Units used are D = Day, H = Hour, and M = Minute:
Base Time: 00:00 0 : 00
Sample Interval: 0001D 1 D (D/H/M)
Number of Samples (Per Average): 7 7
Number of Averages: 1 1
Standard Item Counting: Y Y
--------------------------------------------------------------------------------
F1 - Show config F8 - Update
SF14 - Recover F15 - Help F16 - Return SF16 - Main Menu
BLOCK