TRANSFER Installation and Management Guide

About This Manual
068837, Update 1 to 013198 Tandem Computers Incorporated xxiii
The Communications Utility Program (CUP) Reference Manual describes the CUP
commands used to perform operations related to data communication lines
and devices and network environments.
The Subsystem Control Facility (SCF) Reference Manual describes the operation
of SCF and how it is used to configure, control, and inquire about supported
data communications subsystems.
TRANSFER provides electronic mail delivery for TRANSFER clients supplied by
Tandem. Through TRANSFER and TRANSFER clients mail can be exchanged
electronically on a variety of terminal types and devices. The following manuals
provide detailed information about TRANSFER clients:
The PS MAIL Manual for 6530 Terminals documents the PS MAIL 6530 client,
which provides for electronic exchange of mail in full-screen mode on Tandem
6530 terminals or compatible terminals.
The PS MAIL Manual for 3270 Terminals documents the PS MAIL 3270 client,
which provides for electronic exchange of mail in full-screen mode on the IBM
3270 family of terminals.
The PS MAIL Reference Manual for TTY Terminals provides a complete
description of the PS MAIL TTY client, which provides for electronic exchange
of mail on conversational terminals.
If you are using the TRANSFER X400 gateway to foreign X.400 message handling
systems, you can refer to the following manuals:
The Tandem OSI/MHS Configuration and Management Manual tells you how to
plan, install, configure, manage, and maintain your MHS subsystem.
The Tandem OSI/MHS Management Programming Manual is a guide to writing
programs to communicate with the MHS subsystem using the Subsystem
Programmatic Interface (SPI).
The SCF Reference Manual for Tandem OSI/MHS describes the Subsystem
Control Facility (SCF) for your MHS subsystem. SCF is an interactive interface
that allows operators and network managers to configure and control data
communications subsystems.
What Do You Think? The TRANSFER Installation and Management Guide is intended to provide information
that will help you manage your TRANSFER system. After reading this manual, please
take a moment to fill in the Reader’s Comment Card at the back and return the card.
Your comments let Tandem improve manuals so that they are as useful as possible.