TRANSFER Installation and Management Guide

X400 RECIPIENT Screen
TMANAGER
10–54 13198 Tandem Computers Incorporated
You get the second page of the X400 RECIPIENT screen by pressing the NEXT PAGE
key. Figure 10-17 shows the second page of the X400 RECIPIENT screen.
Figure 10-17. X400 RECIPIENT Screen, Page 2
TMANAGER X400 RECIPIENT SCREEN Page 2 END
Free Form Name:
Domain Defined Attribute 1: Attribute Type:
Domain Defined Attribute 2: Attribute Type:
Domain Defined Attribute 3: Attribute Type:
Domain Defined Attribute 4: Attribute Type:
F4=Show First Recip SF14=Recover F16=Return
F5=Show Next Recip F9=Print F15=Help SF16=Main Menu
BLOCK
Field Descriptions—Page 2 The second page of the X400 RECIPIENT screen displays additional elements of the
O/R address used by the OSI/MHS system. See the Tandem OSI/MHS Configuration
and Management Manual for definitions.
Function Keys The X400 RECIPIENT screen lists the tasks you can perform from this screen by
pressing the indicated function keys.
Show First Recip (F4) displays the first recipient record that matches the selection
on the RECIPIENT SELECT screen.
Show Next Recip (F5) displays detailed information for the next recipient in the
selected set.
Print (F9) prints the current screen. Output goes to the location specified in the
Current Printer Location field on the TMANAGER MAIN MENU screen.
Recover (SF14) recovers the screen to its last state.
Help (F15) gets a HELP screen explaining the X400 RECIPIENT screen or provides
detailed information for the error message currently on the advice line.
Return (F16) returns you to the X400 RECIPIENT screen.
Exit (SF16) returns you to the MAIN MENU screen.