TRANSFER Installation and Management Guide

Define Files
A–4 068837, Update 1 to 013198 Tandem Computers Incorporated
-------------- RECONFIGURABLE PARAMETERS --------------
TRUserDSV $vol.subvol
-- Specifies the user-DSV for Base TRANSFER. You
-- must specify both volume and subvolume names.
-- Required, reconfigurable parameter.
--****************************************************
-- Delete the following cpu specification on a 1-cpu system.
TRPathmonCpu [CPUA]
-- Specifies the primary and backup CPU for the
-- PATHMON process. Change the pair of CPUs
-- specified if the default is not appropriate for
-- your system. Required, reconfigurable parameter.
--****************************************************
TRPwayLocation $SYSTEM.SYSTEM
-- Specifies the volume and subvolume on which the
-- PATHWAY software resides. Change the default
-- value if you wish to run another version of
-- PATHWAY. Required, reconfigurable parameter.
TRPwayHomeTerm [Home_Term]
-- Specifies the home terminal for the PATHWAY system.
-- Change the default value if you want a different
-- home terminal for PATHWAY. You can enter any valid
-- home terminal specification. If not entered, the
-- home terminal is the terminal from which you run
-- program XCOOL, which starts your TRANSFER system.
-- Optional, reconfigurable parameter.
TRPwayLog1 $S.#PWAY.LOG1
-- Specifies the PATHWAY run-time diagnostic log.
-- Change the default value if you want another file
-- to hold the log. The log can be written to a
-- device, process, or disk file. If you specify a
-- disk file, the disk file MUST already exist.
-- Required, reconfigurable parameter.
-- **** Take care setting the following PATHWAY parameters; you
-- cannot alter their values after cold loading PATHWAY:
TRPwaySecurity U
TRDEFLTS File—Base TRANSFER