TRANSFER Installation and Management Guide

Define Files
A–6 068837, Update 1 to 013198 Tandem Computers Incorporated
-- the default value to any value from 20 to 4095.
-- Required, reconfigurable parameter.
TRPwayMaxParams 100
-- Specifies the maximum number of PARAM
-- specifications for all server classes (generates
-- SET PATHWAY MAXPARAMS command). You can change
-- the default value to any value from 20 to 4095.
-- Required, reconfigurable parameter.
TRPwayMaxPathcoms 31
-- Specifies the maximum number of PATHCOM process
-- that can run simultaneously within the PATHWAY
-- system (generates SET PATHWAY MAXPATHCOMS command).
-- You can change the default value to any value from
-- 10 to 40. Required, reconfigurable parameter.
-- TRPwayMaxLinkMons 0
-- Specifies the maximum number of Pathway Linkmon
-- processes that can be used. This is not currently
-- needed for any client, but is included here for
-- support of future mail clients that might need
-- this parameter. The value can range from 0
-- (default) to 800. Optional, reconfigurable
-- parameter.
-- TRPwayMaxSpi 1
-- Specifies the value for a Pathway SET MAXSPI <n>
-- command. This is optional; if omitted then the
-- SET MAXSPI <n> command is not generated and Pathway
-- uses the default of 1. The value can range from 1
-- (default) to 100. Optional, reconfigurable
-- parameter.
TRPwayMaxPrograms 30
-- Specifies the maximum number of program
-- descriptions that can be added to the PATHWAY
-- control file (generates SET PATHWAY MAXPROGRAMS
-- command). You can change the default value to any
-- value from 10 to 4095.
-- Required, reconfigurable parameter.
TRPwayMaxExternalTcps 10
-- Specifies the maximum number of external TCP
-- processes that can simultaneously communicate with
-- the PATHWAY system (generates SET PATHWAY
-- MAXEXTERNALTCPS command). You can change the
TRDEFLTS File—Base TRANSFER