TRANSFER Installation and Management Guide

Define Files
068837, Update 1 to 013198 Tandem Computers Incorporated A–7
-- default value to any value from 0 to 4095.
-- Required, reconfigurable parameter.
TRMinPriority 128
-- Specifies the minimum priority for all TCPs and
-- servers in the TRANSFER system. You can change the
-- default value to another valid process priority.
-- The value you specify must be at least 10 less than
-- TRMaxPriority (below).
-- Required, reconfigurable parameter.
TRMaxPriority 148
-- Specifies the maximum priority for all TCPs and
-- servers in the TRANSFER system. You can change the
-- default value to another process priority. The
-- value you specify must be greater than
-- TRMinPriority (above) by 10 or more.
-- Required, reconfigurable parameter.
-- **** Configure External Objects ****
TRExtobjsEnabled YES
-- Specifies whether external objects are enabled.
-- You can specify YES or NO. If you do not enter
-- this parameter, the default is YES.
-- Note that external objects are required for
-- Wordlink or the X.400/TRANSFER Gateway.
-- Optional, reconfigurable parameter.
TRExtobjsVolume00 $vol
-- Specifies the volumes to be used for storing
-- external GUARDIAN 90 files that are attached to
-- TRANSFER objects. You must specify at least one
-- volume name if external objects are to be enabled.
-- If you do not have external objects
-- (TRExtobjsEnabled was set to NO) you can comment
-- this out.
-- You can insert additional parameters if you need
-- more volume names generated. The parameter format
-- is:
-- TRExtobjsVolumeN $vol
-- where N can be any number from 00 to 19;
-- increment N by 1 for every parameter you insert.
TRDEFLTS File—Base TRANSFER