TRANSFER Installation and Management Guide

Define Files
A–10 068837, Update 1 to 013198 Tandem Computers Incorporated
TRTareqTcps 1
-- Specifies the number of TAREQ-TCPs for the TRANSFER
-- PATHWAY system. You can change the default value
-- to any value from 1 to 99. This value determines
-- the minimum number of process names that you must
-- define for TAREQ-TCP processes.
-- Required, reconfigurable parameter.
TRTareqTcpNames0 $[Initials]AA:Z
-- Specifies the process names for TAREQ-TCP
-- processes. You can insert additional parameters if
-- you need more process names generated. The
-- parameter format is:
-- TRTareqTcpNamesN $[Initials]AA:Z
-- where N can be any number from 0 to 9;
-- increment N by 1 for every parameter you insert.
-- $[Initials]AA:Z must be a valid name specification that
-- generates unique process names within your system.
-- (See Process Name Generation.)
-- The number of process names that can be generated
-- from the TRTareqTcpNamesN specifications must not
-- be less than the number of TAREQ-TCP processes --
-- (TRTareqTcps parameter).
-- Required, reconfigurable parameter.
--****************************************************
-- Delete the following cpu specification on a 1-cpu system:
TRTareqTcpCpu0 [CPUC]
-- Specifies a primary and backup CPU pair for
-- TAREQ-TCP processes. Specify at least one CPU
-- pair. You can insert additional parameters if you
-- want to specify more CPU pairs. The parameter
-- format is:
-- TRTareqTcpCpuN (P:Q)
-- where N can be any number from 0 to 9;
-- increment N by 1 for every parameter you insert.
-- P and Q are any valid CPUs in your system.
-- CDTRDEF assigns processes to CPU pairs in ascending
-- numeric order and starts over with CPU pairs if
-- processes exceed pairs.
TRDEFLTS File—Base TRANSFER