TRANSFER Installation and Management Guide

Define Files
068837, Update 1 to 013198 Tandem Computers Incorporated A–11
-- Required, reconfigurable parameter.
--****************************************************
--**** Define TRANSFER Asynchronous Requesters (TAREQ) pseudo-terminals
TRTareqTerms 2
-- Specifies the number of TAREQ pseudo-terminals
-- and the minimum number of TWORK and TISERV-ASYNC
-- servers. You can change the default value to a
-- value from 1 to 99.
-- Required, reconfigurable parameter.
-- TRTareqTcpSwap $vol
-- Specifies the PATHCOM command SET TCP SWAP for the
-- TAREQ-TCPs. You can enter only a volume name (not
-- an individual file name) because this parameter can
-- apply to multiple TCPs. The volume must exist. If
-- you do not enter this parameter, the default is the
-- volume specified for parameter TRUserDSV.
-- Optional, reconfigurable parameter.
-- TRTareqTcpGUARDIANSwap $vol
-- Specifies the PATHCOM command SET TCP GUARDIAN-SWAP
-- for TAREQ-TCPs. You can enter only a volume name
-- (not an individual file name) because this
-- parameter can apply to multiple TCPs. The volume
-- must exist. If you do not enter this parameter,
-- the default is the volume specified for parameter
-- TRPwayLocation (usually $SYSTEM).
-- Optional, reconfigurable parameter.
-- TRTareqTcpMaxterms 20
-- Specifies the PATHCOM command SET TCP MAXTERMS for
-- TAREQ-TCPs. You can enter any value between 1 and
-- 4095. If you do not enter this parameter, MAXTERMS
-- is set to 20. Optional, reconfigurable parameter.
-- TRCleanupTareqTerms 2
-- Specifies the number of TAREQ pseudo-terminals
-- which are dedicated to preforming priority 0 work.
-- You can change the default value to a value from 1
-- to 99. Optional, reconfigurable parameter.
-- **** Define TRANSFER Receiver Front End (TFRONT) pseudo-terminals
TRTFrontTerms 2
-- Specifies the number of TFRONT pseudo-terminals.
TRDEFLTS File—Base TRANSFER