TRANSFER Installation and Management Guide

Define Files
A–24 068837, Update 1 to 013198 Tandem Computers Incorporated
-- depot is not specified for a new group. You can change
-- the default name to a valid simple TRANSFER name.
TRSysAdminCorr SYS-ADMIN
-- Specifies the correspondent for the system
-- administrator depot created by the initialization
-- procedure. This system administrator has both read
-- and write privileges. You can change the default name
-- to any valid simple TRANSFER name.
TRInitOut $S.#TRAN.INIT
-- Specifies the output device or process for all the
-- programs run by the GTRINIT obey file, which
-- initializes Base TRANSFER.
-- THIS MUST NOT BE A DISC FILE!!!
-- If you do not include this
-- parameter, all output from initialization is written
-- to the terminal from which GTRINIT is run.
-- Optional, initialization parameter.
-- **** Initial Depot Statistics Parameters ****
TRStatsCollectStats NO
-- This yes/no parameter indicates whether depot storage
-- statistics should be collected.
--
-- This parameter is not reconfigurable. If you want to
-- change after initialization, use the Depot Statistics
-- Configuration function in ADMIN.
--
-- Required, initialization parameter.
TRStatsCountWhenExamined NO
-- This yes/no parameter indicates whether item storage
-- will be included in the depot storage statistics upon
-- (NO) item delivery to the inbox or upon (YES) examination.
-- This parameter must be present if TRStatsCollectStats
-- is YES.
TRStatsStartTime 00:00
-- This HH:MM (Hour:Minute) parameter indicates the time of
-- day that depot storage statistics collection will begin.
-- This optional, initialization parameter must be present
-- if TRStatsCollectStats is YES.
TRStatsSampleTime 1D
-- This interval (in days, hours, or minutes) represents the
TRDEFLTS File—Base TRANSFER