TRANSFER Installation and Management Guide

TSCHED Output File Error Messages
Error Messages
13198 Tandem Computers Incorporated B–55
n ]:UOW xxx failure; snnnn/snnnn in xxxx
Cause. The TAREQ has encountered a UOW error for which it has no suitable recovery
code. The xxx and xxxx are internal TAREQ mnemonics; the xxxx indicates the
TAREQ module; the xxx indicates the particular UOW within the module. Check the
TRANSFER Reference Manual to see which UOW is affected.
Effect. The TAREQ retries the operation appropriately at least once; excessive retries
cause the TAREQ to hold the assignment.
Recovery. Report this error to your Tandem system analyst or the Online Support
Center (formerly the Customer Assistance Center).
xxxx failure nn on xxxx
Cause. A GUARDIAN 90 input or output call fails unexpectedly. The first xxxx
indicates the call that fails (Awaitio, Keyposition, Open, Read, Readupdate, Write, or
Writeupdate). The indicated number is a GUARDIAN 90 file error code. The second
xxxx indicates the file name.
Effect. TSCHED aborts.
Recovery. Correct the indicated GUARDIAN 90 file error.
xxxx file control record is missing
Cause. The indicated TSCHED file (Ready, Time or Net) does not have a control
record. Your configuration is bad.
Effect. TSCHED aborts.
Recovery. Correct your configuration.
xxxx file has wrong file code ( nn instead of nn )
Cause. The indicated TSCHED file (Ready, Time or Net) has the wrong file code. Your
configuration is bad.
Effect. TSCHED aborts.
Recovery. Correct your configuration.