TRANSFER Reference Manual

CREATE-FOLDER-B10
TISERV UOW Descriptions
069139, Update 1 to 40969 Tandem Computers Incorporated 2–173
UNITS
is the unit of time denoted in QUANTITY. You can set UNITS o D (for days),
H (for hours), or M (for minutes). For any unit, 0 means “no maximum”
(items are saved forever). You can also set this field to P, provided that you
set QUANTITY to 0. 0 P specifies that the profile constraint should be used.
The item retention time for the folder then becomes the same as the item
retention time for the depot in which it resides. Also, you can set this field to
C, provided that you set QUANTITY to 0. 0 C sets the item retention time for
the folder to the default retention time specified for folder creation in the
depot profile.
RETN-CODE
is the return code. TISERV returns a code in this field to indicate problems with
the correspondent name, the folder name, or other areas.
To indicate successful creation of the folder:
0 OK
To indicate problems with the correspondent name:
5600 E-CORR-NSRV-ERR
5601 E-CORR-NOT-FOUND
5602 E-CORR-BAD-NAME
5604 E-CORR-NO-SUCH-NODE
5606 E-CORR-NSRV-NOT-FOUND
5607 E-CORR-NSRV-DOWN
5611 E-CORR-NET-DOWN
5622 E-CORR-NOT-SAME-NODE
5623 E-CORR-AMBIGUOUS-NAME
To indicate problems with the folder name:
5675 E-FLD-NSRV-ERR
5677 E-FLD-BAD-NAME
5679 E-FLD-NO-SUCH-NODE
5681 E-FLD-NSRV-NOT-FOUND
5682 E-FLD-NSRV-DOWN
5683 E-FLD-NO-PARENT
5686 E-FLD-NET-DOWN
5687 E-FLD-ALREADY-EXISTS
5697 E-FLD-NOT-SAME-NODE
5698 E-FLD-AMBIGUOUS-NAME
To indicate problems with the item retention time:
4072 E-UNITS-MUST-BE-DHM
4074 E-INVALID-REL-TIME-QTY
-4269 W-TIME-TOO-LONG