TRANSFER Reference Manual

Summary of Error Codes—Error 4601

Error Codes

069139, Update 1 to 40969 Tandem Computers Incorporated 3–43

4391 E-MUST-BE-IS

Field. ELEM-RETN-CODE

Meaning. Your process tried to set to another value a flag that can only be set to I or S.

This is a detailed identifier error, accompanied by UOW error 4210.

4392 E-MUST-BE-DISK

Field. ELEM-RETN-CODE

Meaning. Your process supplied the name of a nondisk file (such as a process or printer

name) where a disk file name was required. This is a detailed identifier error,

accompanied by UOW error 4210.

4395 E-INVALID-INDENT

Field. ELEM-RETN-CODE

Meaning. Your process specified an invalid number of columns to be indented on the

output device. This must be a value ranging from 0 through 9999, and is usually set

somewhere from 0 through 10. This is a detailed identifier error, accompanied by

UOW error 4210.

4600 W-NOT-PROCESSED-HERE

Field. DELIV-ERR in Recip Record

Meaning. When a TAREQ transports a package to a particular node, a list of all original

recipients accompanies that package. This message flags any listed member who is

not local to that node.

4601 W-XPORTED

Field. DELIV-ERR in Recip Record

Meaning. In the local list of remote recipients used by a TAREQ in transporting a

package, recipients are grouped according to nodes. Whenever the TAREQ completes

its scan of the recipients for a particular node, it transports the package to that node

and flags all recipients in the local list with this message to indicate that the package

has been sent to them.