TRANSFER Reference Manual

Summary of Error Codes—Error 4614
Error Codes
3–46 069139, Update 1 to 40969 Tandem Computers Incorporated
4614 E-ASYNC-BAD-SEQUENCE
Meaning. The component receiving an interprocess message determined from its
function that the sender of the message was not in the state that the receiver
anticipated. The components will synchronize themselves.
4615 W-ASYNC-PRE-TRECV
Meaning. A remote TRANSFER system is running, but its TSCHED does not know how
to handle a request to have a TRECV assigned. The remote function will be put back
into the NET file and will be retried later. The system manager must upgrade the
software on the remote system before a remote assignment can be carried out.
4616 W-ASYNC-NO-IDLE-TRECV
Meaning. A remote TRANSFER system is running, but all of its TRECVs are busy. The
remote function will be put back into the NET file and will be retried later.
4617 W-ASYNC-CANT-REACH
Meaning. A remote TRANSFER system is not running. The remote function will be put
back into the NET file and will be retried later.
4618 E-ASYNC-SAY-AGAIN
Meaning. The component receiving an interprocess message is momentarily incapable
of handling it correctly; the sender of the interprocess message should immediately
repeat it.
4619 W-ASYNC-NO-TRECV-WORK
Meaning. At the direction of its TFRONT, a TRECV became available to its TSCHED for
assignment; but the TSCHED had no assignment for the TRECV. The TRECV should
continue waiting for word from its TFRONT. This error can occur when two
TSCHEDs have problems establishing a TWORK to TRECV connection.