TS/MP Management Programming Manual (G06.24+, H06.03+)

ZPWY-MAP- Definitions
NonStop TS/MP Management Programming Manual—540082-001
7-17
ZPWY-MAP-DEF-SC
ZIN
is the name of the input file passed to the server process in the startup message;
this could be a DEFINE name.
The node name can be either a specific node name or \*, a generic name
representing the node on which the PATHMON process is currently running. If you
do not specify a node name, the default node for the file-name expansion is
determined by the value you specify for the ZNODEINDEPENDENT field of the
START PATHWAY command.
If you do not assign a value to this field, spaces are passed to the servers for the
file name.
This field is valid for Guardian server processes only.
ZLINKDEPTH
is the maximum number of concurrent links that any one link manager (such as a
LINKMON process or Pathway/iTS TCP) can have to a given server process
before the PATHMON process directs that link manager’s link requests to another
server process within the server class.
The value for ZLINKDEPTH should not exceed the value of ZMAXLINKS. The
maximum value of ZLINKDEPTH is 255. If ZMAXLINKS is set to 0, the value of
ZLINKDEPTH should be set to 1. For more information on configuring this field,
see the TS/MP System Management Manual.
Typically, you use the ZLINKDEPTH field to allow multithreaded (in other words,
nowaited) servers. For servers that are not multithreaded (in other words, waited
servers), and for all COBOL servers, use a value of 1 for ZLINKDEPTH.
If you do not assign a value to this field, the default is 1.
ZUNUSED
is present only to satisfy requirements for compatibility with earlier versions.
ZMAXLINKS
is the maximum number of concurrent links permitted between all link managers
(such as LINKMON processes and Pathway/iTS TCPs) and a server in a server
class. This value must be from 0 through 4095. This attribute sets the maximum
number of concurrent send operations to a single server process. The link
manager does not check how many links a server has with other link managers.
For more information on configuring this field, see the TS/MP System Management
Manual.