TS/MP Management Programming Manual (G06.24+, H06.03+)

ZPWY-MAP- Definitions
NonStop TS/MP Management Programming Manual—540082-001
7-33
ZPWY-MAP-PAR-STATS-SCLM
ZPWY-VAL-YES
for a cold start, specifies to start the subsystem regardless of whether a
PATHMON configuration file is present. The PATHMON process overwrites the
existing PATHMON configuration file with the current configuration information.
For a cool start, specifies to use the existing PATHMON configuration file to
restart the subsystem. Any unexpected PATHMON process name in the
PATHCTL file is ignored.
ZSTART
specifies whether to perform a cool start or a cold start. The valid values are:
This table shows the valid combinations of ZIGNORE and ZSTART and the
corresponding PATHCOM commands:
ZPWY-MAP-PAR-STATS-SCLM
This token specifies whether the counters used for statistics measurements should be
set back to zero after the statistics data is returned.
ZRESETSTATS
indicates whether to reset the statistics counters to zero. The valid values are:
If you do not assign a value to this field, the default is ZPWY-VAL-NO.
ZPWY-VAL-COOL Cool start the Pathway subsystem.
ZPWY-VAL-COLD Cold start the Pathway subsystem. The
ZPWY-DDL-DEF-PATHWAY token must be present for
a cold start.
ZIGNORE
Values
ZSTART
Values
ZPWY-MAP-DEF-
PATHWAY Token
Corresponding PATHCOM
Command
NO COLD Required START PATHWAY COLD
YES COLD Required START PATHWAY COLD !
NO COOL Optional START PATHWAY COOL
YES COOL Optional START PATHWAY COOL !
def ZPWY-DDL-PAR-STATS-SCLM.
02 ZRESETSTATS token-type ZPWY-DDL-YES-NO.
end.
ZPWY-VAL-NO Counters are not reset to 0.
ZPWY-VAL-YES Counters are reset to 0.