TS/MP Management Programming Manual (G06.24+, H06.03+)

SPI Programming Considerations
NonStop TS/MP Management Programming Manual—540082-001
3-7
Object Types
Figure 3-1 on page 3-8 contains a table listing the valid objects for each command.
Commands that affect TS/MP objects are described in this manual. Commands that
affect Pathway/iTS objects are described in the Pathway/iTS Management
Programming Manual.
ZPWY-OBJ-SCPARAM A PARAM associated with a server class. This object
allows you to assign a string value to a server parameter
name. This object type is the same as the PARAM
parameter in the PATHCOM SERVER object commands.
ZPWY-OBJ-SCPROCESS A process associated with a server class. This object type
is the same as the PROCESS parameter in the
PATHCOM SERVER object commands.
ZPWY-OBJ-SCSTARTUP A startup string associated with a server class. This object
allows you to associate a startup parameter with a
particular server class. This object type is the same as the
STARTUP parameter in the PATHCOM SERVER object
commands.
Note. You cannot use commands on Pathway/iTS objects unless a licensed copy of the
Pathway/iTS product exists on the system.
Table 3-2. TS/MP Object Types (page 2 of 2)
Object Type Description