TS/MP Management Programming Manual (G06.24+, H06.03+)

Configuration Limits and Defaults
NonStop TS/MP Management Programming Manual—540082-001
A-5
HOMETERM ZHOMETERM Values: Name of home terminal for
servers in class.
Default: Home terminal of PATHMON.
IN ZIN Values: Name of input file.
Default: Spaces are passed for file name.
LINKDEPTH ZLINKDEPTH Values: 1 through 255
Value should be less than or
equal to the value of MAXLINKS.
If MAXLINKS is 0, use the
LINKDEPTH default.
Default: 1
MAXASSIGNS ZMAXASSIGNS Values: 0 through 4095
Default: N.A.
MAXDEFINES ZMAXDEFINES Values: 0 through 4095
Default: 0
MAXEXTERNALT
CPS
ZMAXEXTERNALT
CPS
Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Recommended value if Pathway/TS is not
installed at your site: 0
MAXLINKMONS ZMAXLINKMONS Values: Total of values for MAXTCPS,
MAXEXTERNALTCPS, and
MAXLINKMONS must not exceed
800.
Maximum number of concurrently
running processes (TCP, external
TCP, LINKMON, PATHCOM, and
SPI) must not exceed 800.
Default: 0
Table A-2. Limits and Defaults for Parameters (page 4 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults