TS/MP Management Programming Manual (G06.24+, H06.03+)

Configuration Limits and Defaults
NonStop TS/MP Management Programming Manual—540082-001
A-8
MODE ZMODE Values: ORDERLY | ABORTTERM |
IMMEDIATE
Default: ORDERLY
N.A. ZACCESS Values: I/O | INPUT | OUTPUT
Default: No value is passed.
N.A. ZEXCLUSION Values: EXCLUSIVE | SHARED|
PROTECTED
Default: No value is passed.
N.A. ZFILECODE Values: 0 through 65,535
Default: 0
N.A. ZRECORDSIZE Values: 1 through 4072
Default: No value is passed.
N.A. ZBLOCKSIZE Values: 1 through 4096
Default: No value is passed.
NODEINDEPEND
ENT
ZNODEINDEPEND
ENT
Values: ON | OFF
Default: OFF
N.A. ZNODEINDEPEND
ENTFORMAT
Values: YES | NO
Default: NO
NUMSTATIC ZNUMSTATIC Values: 0 through 4095; must not exceed value
of MAXSERVERS.
The number of dynamic servers for a
server class is MAXSERVERS minus
NUMSTATIC.
For better performance, the value
should be close to or equal to
MAXSERVERS.
Default: 0 (all servers are dynamic)
OUT ZOUT Values: Name of output file.
Default (SERVER):
Spaces are passed for file name.
Default (PATHCOM):
Output directed to PATHCOM list file
(typically the home terminal).
Table A-2. Limits and Defaults for Parameters (page 7 of 10)
PATHCOM
Parameter* SPI Token/Field** Value Limits and Defaults