TS/MP Supplement for Limits Relief (G06.26+)

Chapter 5. Installing and Configuring
Prev Next
Chapter 5. Installing and Configuring
Plan your TS/MP 2.1 Installation
1. Install TS/MP 2.1
2. Start SCF
3. Configure the Domain Coordinator Process ($ZACS)
4. Start Domain Coordinator Process ($ZACS)
5. Configure the ACS Subsystem
6. Start the ACS Subsystem ($ZACS)
7. Start TS/MP PATHMON and Requesters
Use the standard SUT-based utilities to install TS/MP 2.1.
Note: Before starting TS/MP PATHMON processes or starting Pathsend requesters, you
must install TS/MP 2.1 and configure and start the ACS subsystem.
For information on backing out your installation from TS/MP 2.1 to TS/MP 2.0, see Appendix
A, Backing Out Your Installation to TS/MP 2.0.
Plan your TS/MP 2.1 Installation
TS/MP 2.1 cannot reside in the same SYSnn as TS/MP 2.0.●
ACS must reside in the same physical system as TS/MP 2.1.●
You must start the ACS subsystem before starting and using TS/MP 2.1.●
1. Install TS/MP 2.1
The TS/MP 2.1 installation performs the following:
Uninstalls TS/MP 2.0.●
Installs the ACS subsystem components.●
Installs the TS/MP 2.1 components.●
How to do it.