TS/MP Supplement for Limits Relief (G06.26+)

This attribute is required.
DEFAULTVOL $SYSTEM.SYSnn
specifies the physical location where the ACS software and the ACS subsystem
configuration file (BCINI) is installed.
This attribute is required.
PRIMARYCPU primary-cpu
specifies the processor on which the primary domain coordinator process is to be started.
This attribute is required.
STARTUPMSG "num"
indirectly specifies a processor for the backup domain coordinator process, enclosed in
double quotes ("). This attribute sends a message to the domain coordinator process
specifying the backup processor for the process pair. Valid values are:
" num"
The number of the CPU for the backup process.
"-1" Directs the domain coordinator process to select the backup CPU.
This attribute is required.
STARTMODE startmode
specifies when $ZACS is started. Valid values are: MANUAL, KERNEL, SYSTEM,
APPLICATION, and DISABLED. If no value is specified, the default is DISABLED,
which indicates that $ZACS is not started. For a description of all values, see the SCF
Reference Manual for the Kernel Subsystem.
STOPMODE STANDARD
specifies that the operating system must use the PROCESS_STOP_ procedure to stop the
manager process ($ZACS). For a description of all values, see the SCF Reference Manual
for the Kernel Subsystem; the values SPI and SYSMSG are not supported.
This attribute is required.
HOMETERM home-term
specifies the home terminal for the ACS manager process. home-term has the format:
hometerm-file-spec
This attribute is required.
4. Start Domain Coordinator Process ($ZACS)
You must start $ZACS before you can configure the ACS subsystem.