TS/MP Supplement for Limits Relief (G06.26+)

ADD [ /OUT file-spec / ] , [ object-spec ]
, DOMAIN " domain-name"
, ALL , ENABLE
, LOG1 log-file-name:"format":" filter"
[ ,LOG2 log-file-name:"format":" filter" ]
, ACSCTL $SYSTEM.ZACS.ACSCTL
Syntax Descriptions.
OUT file-spec
specifies a file for the output of this command. The file can be on the same physical
system as the ACS subsystem or on any system in the same Expand network.
object-spec
specifies the name of an ACS object to be added to the specified physical system. The
fully qualified object-spec has the format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you specify the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information about the ASSUME command, see the SCF Reference Manual for G-Series
RVUs.
If you have not used a prior ASSUME command and you omit system-name, the
command defaults to the local physical system.
DOMAIN "domain-name"
specifies the name of the ACS domain to which the physical system is being added. This
attribute is required.
Note: For this version of TS/MP, HP strongly recommends that you specify the
system name for the domain name; the specified domain name must be unique
to domain names specified for any other ACS subsystems in other physical
systems.
domain-name is a string from one to seven alphanumeric characters enclosed in double
quotes ("). The first character must be alphabetic, for example, "Mars" or "Pluto3".
ALL
specifies that ACS subsystem functions are configured for all processors in the system.