TS/MP Supplement for Limits Relief (G06.26+)

system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you specify the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information about the ASSUME command, see the SCF Reference Manual for G-Series
RVUs.
If you have not used a prior ASSUME command and you omit system-name, the
command defaults to the local physical system.
Examples.
The following commands show two different ways to remove an ACS object from the ACS
subsystem on the local system.
DELETE ACS $ZACS
or
ASSUME ACS $ZACS
DELETE
The following command deletes the ACS subsystem on the remote system \PLUTO:
DELETE ACS \PLUTO.$ZACS
INFO
Use the INFO command to display the current ACS subsystem configuration (in other words,
the values set by the ADD and ALTER commands and stored in the BCINI file).
This is a nonsensitive command.
Syntax Summary.
INFO [ /OUT file-spec/ ] [ object-spec ]
[ , DETAIL ]
Syntax Descriptions.
OUT file-spec
specifies a file for the output of this command. The file can be on the same physical
system as the ACS subsystem or on any system in the same Expand network.