TS/MP Supplement for Limits Relief (G06.26+)

object-spec
specifies the name of the ACS object. The fully qualified object-spec has the format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you specify the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information about the ASSUME command, see the SCF Reference Manual for G-Series
RVUs.
If you have not used a prior ASSUME command and you omit system-name, the
command defaults to the local physical system.
DETAIL
specifies that the display is to include additional detail information on the object.
Display Format With DETAIL Option.
subsystem-name INFO ACS [\ system-name.object-name]
ZACS
*Domain............domain-name
Processor status..nnnn, nnnn, nnnn, nnnn
*LOG1..............logfile-name
*LOG2..............logfile-name
ACSCTL............$SYSTEM.ZACS.ACSCTL
asterisk (*)
indicates attributes that you can modify using the ALTER command.
subsystem-name
the name of the subsystem.
\system-name.object-name
the name of the physical system from which the command was executed and the name of
the ACS object.
domain-name
the name of the ACS domain.
nnnn, nnnn, nnnn, nnnn
the processors in which the ACS subsystem processes are enabled. Each digit represents a
specific processor, beginning with CPU 0 on the left through CPU 15 on the far right.