TS/MP Supplement for Limits Relief (G06.26+)

Syntax Summary.
NAMES [ /OUT file-spec/ ] [ object-spec ]
Syntax Descriptions.
OUT file-spec
specifies a file for the output of this command. The file can be on the same physical
system as the ACS subsystem or on any system in the same Expand network.
object-spec
specifies the name of the object. The fully qualified object-spec has the format:
[ ACS ] [ system-name.]$ZACS
system-name is the physical, Guardian name of the system in which the object is
being added and configured.
If you specify the SCF object type (ACS) or any portion of the object name (
acs-spec) in a prior ASSUME command, you can omit it in this command. For
information about the ASSUME command, see the SCF Reference Manual for G-Series
RVUs.
If you have not used a prior ASSUME command and you omit system-name, the
command defaults to the local physical system.
Display Format.
subsystem-name NAMES ACS object-name
subsystem-name
object-name
subsystem-name
the name of the subsystem.
object-name
the name of the object.
Example.
The following NAMES command: