TS/MP Supplement for Limits Relief (G06.26+)

934
FEScTransactionAborted
Cause. The transaction associated with the dialog was aborted.
Typical file-system error: 0 (FEOK).
Effect. The procedure initiation fails with an error. The dialog is aborted.
Recovery. Use SERVERCLASS_DIALOG_END_ or SERVERCLASS_DIALOG_ABORT_
to terminate the requester's portion of the dialog.
947
FEScRoutConnect
Cause. There is a problem communicating with the ROUT process in this processor.
Typical file-system errors: 14 (FENoSuchDev), 30 (FENOLCB), and 201 (FEPATHDOWN).
Effect. The send initiation fails with an error.
Recovery. Recovery depends on the file-system error.
File-system error 14 indicates that there is no ROUT process executing in the processor.
File-system error 30 indicates that the ROUT message queue is full. Retry the send; the status
of the ROUT message queue continually changes.
File-system error 201 indicates that the ROUT process has failed; there is no recovery from this
error. Have the requester close out processing and stop. Use the SCF ACS CONTROL
command to restart the ACS subsystem processes in the failed CPU. If you need to contact your
support organization, collect the ABEND files for the ACS subsystem redirector, configuration
subscriber, and process broker processes.
960
FEScProtocolConflict
Cause. The send operation protocol is invalid on the link to the selected server process due to
an internal failure.
Effect. The operation is not performed.
Recovery. None; contact your HP analyst.